Viewing all customer Discussions for:

Other

Repairing or replacement from 1950?s Truscon steel casement hardware... the cranks don?t connect with the teeth on the arm?

Hello, Looking for the latch portion/hook replacement hardware on the attached photos.

Hello, we need to replace the locking lever on several of our windows. The outer casing that has the screws is fine, there are just several windows where the actually lever has broken.

Need to replace some of my crank opener on my windows

I need a drop handle for a nightstandThe bedroom set was called BellaseraEd

Need replacement exterior handle see pictures

Hi, I have a broken double-coil balance. Theonly marking on it is a C stamped on the coil. The window sash weighs about 16 lbs. Would any of your parts match this? Thanks!

HelloI have series 795 balances 1" shoe with a hook on top! Can I switched it to the standard one with the screw instead?It's 34" (stamp: 34C BSIN 11)Looking for qty 4.

Dear sirs: I have an older sliding glass door (probably 30 years) It is vinyl covered aluminum door The rollers are not the standard wheels but use a series of rollers to move the door Had 2 sets. The back set is worn out and you have to lift the door to make it move Please let me know of any addit ... (cont.)

Hi, I need to replace the door/window handle shown in the attached photos. Thanks, Luis

I am having trouble determining which trim is the best replacement for the Alenco sliding windows. Please let me know if you need anymore pictures. Thank You

Looking for a lock replacement on sliding door with the following details found on the door: PPG Herculite K Tempered Safety Glass 16 CFR 1201 C II ANSI Z 97.1 1984 5/32" U SGCC - 1111 4012387 In addition to the lock, we want a replacement strip between the door (Directly attached to the door) ... (cont.)

Plastic piece in center of picture is broken. Rest seems to be intact with string, 17" spring, and 33" hsg as in picture for all 3 parts including broken off plastic piece in the middle.After speaking with representative, he asked me to send a picture of the left side which is not broken and submit ... (cont.)

Attached are pictures of casement hardware of an original 1938 window. I am missing the crank and latch for the window but would be willing to get all new hardware if you have something that works. The window is only 13" wide.

NEED 14 CASEMENT CRANK HANDLES FOR WEATHESHIELD 2000 WHITE VINYL WINDOWS INSTALEED 2001 COLOR IS WHITE NON FOLDING

I have an International Brand hand, latch and keep I need to replace. I havent a clue what measure for. Any help most appreciated!

I need the charging tool for the 27" series 600 spiral tilt window balancers.

I am looking for 2 dishwasher kick plate screws.The dishwasher is a whirlpool WDT710PAHZ. I have attached pictures showing the (broken) plastic screw for the kick plate. The screw is 2cm in diameter. Thank you.

Window is no longer attached to bottom of window arm. Arm number is HG04-2004 It is a Silver Line casement window, with a right opening. Purchased 10/09 Series #7500

Need to replace these two window balances that came from the same window. I can't seem to identify the proper replacements using your guide. Please help me! 1/2" channel, 27" long metal piece (not including the plastic tips), stamped: 26 6 BX CMC 7 26 5 CX CMC 7 THANK YOU!!!!