Viewing all customer Discussions for:

Other

I'm replacing my Stanley bottom rollers with 23-041 and found a discussion board that referenced the track for those rollers but the link was for 60" I am looking for bottom track for your 23-041 rollers in 72". Do you carry that?

I have a few operators that work to open the window and close the window up until the last 3-4 inches or so. I have to help the window close by pulling it in. Would changing the operators help fix this issue? I am assuming one of the gears may be worn from tenants trying to close the windows when th ... (cont.)

Looking for a replacement for a broken DNS mortise Lock.The dimensions for the lock are:Installation Holes: 3 5/8"Main Body Length: 3 1/8"Main Body Depth: 1 1/8"Main Body Width: 1/2"Face Plate Outer Holes: 5 1/2 "The Door Handles are: Sash Controls Inc. PT. 1963

The Series 380 appears to be best but with a different shoe. The shoe that seems to be a closer fit is #15-029 with a 7/8" deep NOT the #15-005. Do you have that channel spring that uses that shoe? Would need 2 pairs, one for a 13# sash, another for a 19# sash. Anything that can solve that prob ... (cont.)

need to know the part number I have balances 35" long part number on a balance 864 34-9EBS cmc 1 Window size 70X51 w/fin or flange frame single hung made by NYAIR Can I order them from you? How fast is shipping?

Hello I have 2 Stanley exterior doors No 98030-05-01 30 1/2 inches Which replacement sweep would I need? Thank you

Hello, I have several double hung windows in my house that have broken pivot shoes. Can you help identify the part number for replacing these (see attached pics)

I am looking to replace the sliding door handles in 6 doors

Have a look at my photos and let me know which replacement will work. Thank you.

Hello, Please help to identify PIVOT SHOE. Also i need a 30" Series 600 Spiral Tilt Window Balance - 1st pic. Thank you.

The tongue of the coil has a print of "5EC". Does it mean its stamp number is #5?

Hi there is not a part number on this piece 2 x 1 1/2

B6 26-1 J85(?) CMC

Hello, I need to replace my 2 spring balances. They are almost 30 years old, and pieces are broken off the ends as well as a broken block and tackle on one. They are stamped Caldwell 26 4. Thank you for your help. Eric

Do you have this internal window latch?

Need finding right roller for a pocket sliding door.house was built in1965 need info on harewar replacement.thanks

spring is 22 inches long and about 5/16 dia There are 4 springs and guides for each window

I am looking for the white piece shown. I have several windows that piece is broken on. The windows also SLAM and don't come down easily. I need to fix that problem as well. thank you for your assistance.

I have another question. I have 2 exterior sliding glass doors. Both were installed with the sliding door on the outside. This keeps me from using the normal security of using a board to keep the door from being opened from the outside. I am wondering if there is any hardware I could purchase fro ... (cont.)

20 year old Peachtree double hung window Need release mechanism located at the top of each window section (4 total)