Viewing all customer Discussions for:

Other

I need to replace two rollers. The rollers have a specific fit to slide into the aluminum framing. I have one roller that works and allows me to adjust the height, but the other screw on the other older is rusted frozen. It says PATIORAMA on the door handle, and was likely installed in the late 6 ... (cont.)

Woodco Corp Window Products. These are 60's era wood awning windows

I'm having trouble finding these single drum-style drawer rollers for my kitchen cabinets that were built in the 1960s(?). 3 per drawer are installed on some of our drawers, one on each side of the cabinet opening for the drawer, and a third on the back center of the drawer (which contacts the cen ... (cont.)

I believe this screen retainer clip is from a Ply Gem series 1500 single hung vinyl window. I am missing several clips and have not been able to find replacements locally. Can you identify this clip or suggest a possible replacement?

Hi, do you have replacement that I can purchase?

Hello, I am looking for a replacement for this window operator arm. It is originally part of the mechanism for an octagonal window wood frame mounted. Size of arm is 6.25" inches from pin to bearing and is 7.25" inches in length total from edge to edge. Nothing else will work for this window crank ... (cont.)

H-r45. Series 40-06. Single hung pl#063-014

I have purchased a house two months ago and it was built in 2002 and there are a lot of broken trim around all of the windows

Need replacement parts

Aluminum windows on1990 home in good condition , but plastic clips on spring broken and spring stays up . Any ideas on what to do Thanks Vinnie

The coil balance belongs to a MI window 3500 series. Thanks for your help Andreas

Hello, I'm trying to identify some broken pieces for my vinyl window. I have a double hung tilt window with round springs (red). The plastic shoe/brake in the window track is broken. I'm unable to measure the track b/c that will involve cutting the window. I'm also unable to see any manufacturer ma ... (cont.)

Hello, I'm hoping you can help me identify this window operator. I need to replace the whole part. The arms measure roughly 16 and 1/8 inches (not certain since I cannot close the window). The crank housing (spline?) measures exactly 5 inches wide. Thank you.

I need to get matching balance to replace Caldwell 26.4 ex 18, what part # should I order? thanks Chuck

This part is plastic with 2 rollers

29" x 5/16" Blue Tip balance

I believe these are malta windows from 1979. I need the clip that screws on

I have 4 windows that have this style regulator. The white item with 2 screws is new to me. There are letters from A-F on the sides and the #2. All the other windows have spiral type. I am not familiar with what I have. Do you recognize this style. I'm afraid to unscrew the part, in case it's under ... (cont.)

Good morning. I would appreciate your help in identifying replacement options for my storm door handle. The handle currently separates from the door if I try to open it too quickly and I'd prefer to replace the handle vs replacing the entire door. Though I thoroughly checked the door and handle, ... (cont.)

Need to replace sliding glass patio door hardware. The holes in the door are 5 3/8th apart and it is also a surface mount.