Viewing all customer Discussions for:

Other

These are sun porch windows. We can find no identifying names or numbers. We need to replace the glass and the trim is old and brittle and cracking. We need the trim that holds the glass in place.

The dimensions and the strip can be seen in the accompanying photo.

how can i get a replacement for this broken part? Patent # 1,610,108 - a search for this online brought me here. Thanks, Jamey

Need this size sash clip and measure about 13/16

I actually agree with your recommendations of the 70-080 window clip and 70-112 thumb screws. If you want to ensure these are a match, you can order just one of each part to see if this will work on your window.

Missing window crank from what seem to be original awning windows from a house built in 1968. Window and parts seems to have no useful markings on them, but the spline is too big to fit any of the cranks that I have purchased listed as 3/8". Looking for any assistance

4-3/8" long top 1-9/16" wide Left hand socket: 3/8" wide X 1-3/32" tall X 1-1/16" deep Mounting slot on back will hang on 1-3/16" wide board, which is fastened to back wall of cabinet.

This is a truth catchment window. Please see if you can match image

Hello! The plastic roller on the glide for our mirrored bifold door has come apart and I haven't been able to find a replacement part for it. Unfortunately, I don't know the brand name of the door (can't find it anywhere on the door itself). All I know is that we purchased the doors at Home Depot in ... (cont.)

I need to find replace strips for the bottom of my Pella window screens. The base is 3/16s wide and the fibers are 3/16s long. I have 7 screens that are about 32 inches wide and 1 screen about 28 inches wide. I need to know the availability and the cost to replace the strips on all of them. Tha ... (cont.)

Thanks for reaching out to SWISCO. On this page you will see a list we compiled of different roller assemblies. Take a look at each one and carefully review all of its measurements. See if any of these will match up to what you have. If none of these will work, let us know the measurements you are l ... (cont.)

Thanks for posting. This looks like a Series 775 Channel Balance. Measure the length of your balance, not including the bottom shoe attachment, to determine the length you need. To know what option to select, you will need to weigh your window sash and also the size of the bottom shoe. Let us know i ... (cont.)

Inside door mortise part for a Wright products VMT115SN

Good afternoon, The attached pictures are for 2 cottage style double hung units. I believe they are Weathershield circa 1984. The customer would like us to replace the jamb liners and balances. The interior height of the liner is 66" to the short point of the bevel. Please let me know if you need mo ... (cont.)

Do you have a conversion kit for an Andersen 200 series where the lock is separate from the handle? I need to be able to lock and unlock it from the outside. The bolt holes appear to be about 2 and 9/16 of an inch apart.

Is your 80-022 actually rubber, or hard plastic? If rubber, does it "give" at all when squeezed by hand?

Looking for the top roller hardware that keeps the door on track.

The part that I need is for a bifold mirror door. It is the bottom pivot. The pictures I've attached are simply both sides of the part. The only identification on the door is a sticker that says "sunshine mirror." On the back of the part there is a number. I believe it is 26-001. I would appreciate ... (cont.)

Hi, do you have this piece? I just need change it for my 4 sliding mirror closet. Thank you for the info

Need help with replacement hinges please! Thank you!