Viewing all customer Discussions for:

Other

Hello, The only numbers I could find are on the handles, one says 4 and one says 5. I am missing the actual latch, so not sure if there are any part numbers on that. The handles are 4" x 2.25", the distance between the screw holes is 3". Any assistance you can provide to determine which latch asse ... (cont.)

48 or 46" wide by 58" tall window that weighs 25lbs.2004 home builtbalancer is 5/8" wide metal is 25 13/16" longcan you give me a model no to order right parts

Appears to be an amesbury truth entryguard, without alignment lugs, almond in color, your site only has them listed in white and bronze, can I get 12 of them in almond?

Hi, I have casement windows and a couple the handles are broken, unfortunately I do not have the manufacturer details and I do not see the manufacturer information on any of the windows. I have attached some pictures of the handle, and am hoping you can help me in identifying the manufacturer and I ... (cont.)

Hello, These are from two similar windows. The sash measures 34" X 25" for the larger one and 34" X 19" for the smaller one. The channel balance measures 9/16" in width. The long one is 24" in length and stamped with 2320. The short one is 18 1/2" in length and stamped with 1820. The shoe is winge ... (cont.)

Hi, I did not see these on your site but wondering if you could help ? They are from vinyl tilt windows probably real cheap ones all the homes in Florida are kind of built that way.The difference is the security lock that keeps the window from going up to far. The part that is broken is the angle sl ... (cont.)

Do you have a replacement for this keeper marked #30283. The screw holes are 7/8" apart.

6ft Andersen door need new track glass on door states Ford safety glass. I have enclosed a picture of the old track Do you have a replacement one for this door? Thanks

Could not find any marking on frame

Believe this is a Truth Window Keeper. Can?t locate the specific piece though. The Truth lock it is used with is 31401.

Dear Swisco,Please help me find a good door handle replacement for a Cole Sewell 2600/2620 handle purchased in 1998. see attached photos. Thank you. Zoraida

I had a window that would only go up so much ( see pictures), when I titled it out I saw the coil had broke. I have removed the coil, but now need to replace it. Thanks!

Hello,I have six windows with broken balances of the crossbow series 850 type, the crossbow is black and 1.5" wide. The spring is 13.75", the length of the gray rod is 27.25" and the full length of the unit with crossbow and top attached is approximately 28.5". The window sashes are 30". The closes ... (cont.)

This part holds the chain to the skylight allowing it to crank open

My picture is listed on the left of a Norco casement window operator crank outassembly. Numbers on the operator; R30842 and on the arm 20755. The long arm is9-1/8" the short arm is 3-3/4". Are the numbers I selected correct or not; 39-155 and 39-156?I need a right and a left one, I have handle and c ... (cont.)

Replacement door handle hardware for estate series model es 381245 needed do you have replacement number brass plate 6.5 by 1.5 inches

I need about 12 of these

the attached photos show the handle I am looking to replace, it looks similar to product code 82-005. however, the attachment screws are 8 inch on center. Please let me know if you have this item available, if not please direct me in the right direction.Steve

Hello, I have two anderson balancers to replace, the left side is bp3412#3112186 and the right side is s321031289. can you recommend replacements for these?

3/16 by 3/16/ white wool pile strip with center fabric-the base is vey thin almost like a thick piece of copy paper-please recommend a part 3 and pricing if possible I could not upload pictures