Viewing all customer Discussions for:

Other

Looking to replace the existing top sash guides on several windows where this part is broken. The photos show one that is not broken. Also, I noticed that there are no screws holding the guide in place, just a tab that was molded from the window frame itself. Can you suggest an effective technique t ... (cont.)

do you have a replacement lock for thus patio door hardware? the screws that attach the lock onto the plate are 3.75" apart.

Hopefully you can help. This is the weather stripping beneath our shower door. It it 3/4" high. Do you have this? Or can recommend a resource that will have it?Thank you.Stu

I'm looking for a Window Crank Handle that might match the one in the picture? It appears to be a "3/8" in a champagne color. Any ideas? Thank you!!! Gloria

I broke a coil spring support removing from the frame. I would like to get a replacement. I have a 15-177 pivot shoe and an S152-8 coil spring. Thank you.

House was built in 1995 in Houston Texas area. Balance diameter is 3/8 inch. Length of balance tube is 30 inches. Cannot find any markings or labels.

looking for left right window locks for Alside windows A201 Double Hung

Didn't find something that looked just like this...

Dear sirs/mesdames: Can you identify this part? Do you need further information or photographs? How can I replace it? · Thank you, · · JayMonmouth Beach, New Jersey ·

Do you have this one?

insulating tape (gray) for series 600 Plygem windowsWeather stripping for Plygem series 600 window, gray wool felt type material approximately 1/8'" thick...original probably had one side sticky. It is installed between windows to insulate the overlap area between the upper and lower sashes. It appe ... (cont.)

We have an Atrium door, but we want to change the handle to silver or satin silver, with a more contemporary handle.

12 teeth are on the spindle on the operator and it has an allen set screw. 1960's vintage commercial aluminum windows.

On the arm there is a marking TRUTH. If you view the photos sent there is also serial numbers. Mine is broken. I am hoping you have replacement part. Finally let me know price and availability. Thank YouAfter viewing the operator on the left, I feel that I should replace both of them. I would need b ... (cont.)

Hi , I have a peach tree slider in need of a new latch and lock Will the 82-225 lock work with this part attached ? It is a button that slides up and down. Thank you Bill

Hole to hole 2" Might be Efco double hung windows?

Can you please point me in the right direction for this part I need. I don?t have a picture installed but it?s 2 Screw and I have attached a picture with measurements. I look forward to your response. Thanks

I need to order brackets for my S200-23. The metal brackets inside of the window frame are not holding the boot tight so I am trying to find out what the replacement part would be

There are no numbers or Mark's on it need your help

We need to replace the pivot shoe from several simonton windows purchased around 2006 that came installed on a modular house. We ordered the Certainteed Pivot shoe #15-192 thinking it would fit but it does not and will need to be returned. I have added a photo. There are no numbers or identificat ... (cont.)