Viewing all customer Discussions for:

Other

I need a pivot shoe that is made by ply gem. It is "T" shaped. Any chance you would carry those. As it sits in the channel it is an upside down "T". It is 1 1/4" wide and 1 7/8" tall

I need a right and left Anderson balance....the only identity marks are C 6 23 373. The holes toward the center of the balance is where screws hold the balance in place. The house was built in the early 1970's. The glass pane is approx. 32x15 both top and bottom windows.Thanks in advance for an ... (cont.)

Hi, I need replacement pins for some old Slimfold Model E closet doors (see pictures). I think I'm supposed to have three retractable and one stationary, right? I sent pics of one of the two doors. What do you think? Thanks!

Here is the number on the original channel balence: 17-3 FA2 CMC 9. It is 18 inches long. We can't tell whether we need 385 or 380. Thanks

Good morning I placed an order in order 25 of these T lock balance shoes which I thought were the correct ones. After trying to install them I realized the ones I had ordered from you guys are just a Tadd bit thicker than the ones that came out of my windows. I have provided the pictures and the ... (cont.)

Per your request here is the picture of the broken handle. The screws are less than 4 inches. Let me know if you need additional information

my casement win actuator has broken Number on arms are -30744 and 20810 is that part avil--if yes do i just order direct from you?

no names or markings on screen door or hardware most likely original parts plastic wheels broken unable to locate part..screen door itself in good condition Thanks in advance for your help.

Hope you can help me with this part there is a number 2320

Hi, I was wondering if you could help me with the proper replacement part. I will likely need 2 of them- please email me contact info for payment if you have it. Thanks!

The sash balance I need is same design as your Series 850 Block and Tackle Rod Balance. Issue is your replacement units are not the same length 28 1/2 inches that I need. Do you carry anything that can be used to replace these?No marking except for patent number on one of the plastic pieces 5.737.87 ... (cont.)

17 inches long metal part. 3/8 deep channel. Stamped in says 16a

This is a Croft window Brown or Bronze. Tilt Sash 400 series 34 " I believe for a 3060 window

What is the difference between Red and Blue?

I need to replace or fix the lever window operator at my apartment. I locked my keys inside and was forced to pull open the window effectively bending the arms on the operator. I was able to bend them back mostly with a vice, however when I go to close the window it does not full close and needs to ... (cont.)

Recently I purchased some window repair parts from you to evaluate the compatibility with my vinyl windows. The Tilt Window Latches and the Spiral Balances work great. (I did have to modify the current pivot shoe to assemble the spiral balance to it) When trying to determine the correct Pivot Shoe, ... (cont.)

I am trying to replace some old Cox & Sons, Pasadena, Calif.? pocket door hardware. The unbroken one is shown in the attached photo. Do you have something similar?

Hi, What sashes would you recommend to replace these? They are 29" from end to end of the metal. Thanks, Ashley

Window rollers. This plastic housing takes one 3/8 in concave steel wheel. I am missing several plastic housing and wheel sets and two extra wheels

I hope that you can help me find this part. It looks like a type of pivot shoe. Manufacture name-unknown. I will be sending photos of other parts that go with this window.Thank you,Andrew