Viewing all customer Discussions for:

Other

Hello I plan on ordering the crank handle number 39-114L and I need the operator cover but that only comes in bronze not dark bronze like the crank. Can you help me with this. Karen Schraufnagel Glass

I see the brand Hettich. Size is 12 2/16 inches, rest you can see on pictures.I see this item , is this the right replacement? I hv 14 drawers. SMALL SIDE MOUNT DRAWER SLIDE PAIR, 12-3/16"Product Code: 32-223Will be waiting for your advise, so i can purchase them. Do you hv a retail store? Live in N ... (cont.)

I would like to know if I could order and have it sent to me the next day.

I can't quite make out the part number. It might be W8713. The part connects the grid and the window frame looks longer like oval and not round shape. The round part that goes into the window frame is around 3/16. Can you identify? Thanks

The 'wand' that connects the bottom of window and the crank is disconnected, need replacement 'crank box assembly'

hand crank mechanism for windows

Afternoon, In need of a Crank Assy. It's a GLW. 90-02 is etched in between the panes as well. It's a 3 bay window. The width is 10 1/2, height is 42 1/2. It is off set to the right. When looking from the outside in it is the left bay window. Please call me at 419-371-3355 and let me know if you ha ... (cont.)

Looking for this drawer pull. Screws measure 5" apart.

attached 2 photos of my operator upon removal. long arm is 10-7/8" and link is 4-7/16".it is for right side, standing outside house hinge is on my right. is this the right part from your website? Product Code: 39-032thank you,Caroline

Stamped on the part are the following numbers: 40471 on base plate; 30470 L.H. Entry Gard Truth on the long straight arm; 20810 and L30841 on the bent arms. There are 5 screw holes.

Hard for me to tell, but I'm wondering if upper and lower sash have the same pivot lock shoes. Each sash has insulated glass (two panes)and is very, very heavy. When lock shoes are broken or spiral balance is worn out the sashes become very dangerous to one's fingers.

Looking for some replacement rollers for a Pella sliding door. The current rollers are (L x H x W) are: 2 3/4 x 1 3/4 x 5/8 inches. I was thinking purchasing either the 81-098 or the 81-249 but my measurements are slightly different. Is there a different roller that I should consider? Thanks for ... (cont.)

1 3/4 in long 3/8 in High 1/2 in Wide Felt on sides Clip on bottom

I need the window clips for an Anderson storm door. I tried to load photos but was unable to in this section

There's no names or numbers on the door that i can see but i believe its an anderson door. I'm looking for the metal or aluminum plate mechanism that is inside of door that attaches to the I shape latch.

Is this regency lock available

Looking for these parts for a window the window latch says Viking

I would like to know if 90-323 is metal?

White finish sash lock and keeper. apart.Latch is designed to lock when slammed shut. Used on Vinyl windows. Slide-Co 173898

How to replace broken window balance