Viewing all customer Discussions for:

Other

Hello,I have six windows with broken balances of the crossbow series 850 type, the crossbow is black and 1.5" wide. The spring is 13.75", the length of the gray rod is 27.25" and the full length of the unit with crossbow and top attached is approximately 28.5". The window sashes are 30". The closes ... (cont.)

This part holds the chain to the skylight allowing it to crank open

My picture is listed on the left of a Norco casement window operator crank outassembly. Numbers on the operator; R30842 and on the arm 20755. The long arm is9-1/8" the short arm is 3-3/4". Are the numbers I selected correct or not; 39-155 and 39-156?I need a right and a left one, I have handle and c ... (cont.)

Replacement door handle hardware for estate series model es 381245 needed do you have replacement number brass plate 6.5 by 1.5 inches

I need about 12 of these

the attached photos show the handle I am looking to replace, it looks similar to product code 82-005. however, the attachment screws are 8 inch on center. Please let me know if you have this item available, if not please direct me in the right direction.Steve

Hello, I have two anderson balancers to replace, the left side is bp3412#3112186 and the right side is s321031289. can you recommend replacements for these?

3/16 by 3/16/ white wool pile strip with center fabric-the base is vey thin almost like a thick piece of copy paper-please recommend a part 3 and pricing if possible I could not upload pictures

I need tboth the right-hand and left-hand cranks and handles

do you have this part available or know the item number and how to obtain it? This is for a window in my office.

Need 6 each of Polaris 3 inch sash pivot bar (window MFG tag is one of the pics)

I have a window that I need to replace both channel balance, its a 28C. From what I have seen the 28 c is a 2830. I am wantting the complete unit with the end sections already on the part. How much will each unit cost and how much for shipping to FL.

We are in need of this part and do not know where to find it. Do you carry them and what are they called

The inside plastic piece broke. The window lock itself is fine. Can I just replace plastic!

Mounting screw holes 3 7/8 in on centers.

fits opening 7.3x47mm (or a hair under 5/16" x a hair under 1 ?") overall length x width 2" x ?"

No window name, all stickers were painted over.

Top and bottom

Trying to locate rollers for a Dorwal patio door. Looks to be a single roller on an adjustable cam. Thanks, Patrick

I have this on the bottom of my door. When I replaced it with new weather stripping, I now have some daylight. Do you have any of these? It?s a Stanley Metal front door.