Viewing all customer Discussions for:

Other

Is 26-241 the correct replacement part for an Appleby window pivot pin? The measurements from your website appear to match the original part (length, width, thickness and hole placement to center of holes) but I am not sure. Thank you

The springs are attached to the lower window by a plastic part which broke. Need to replace the springs and plastic parts and the metal attachment to the windowAre there install instructionsGlass interior measurement is 27 5/8exterior width 30 5/8exterior hieght 31 3/4peter

I have a casement window that doesn't crank open or shut .The number on the crank arm is 07800 .What do I need to fix?Wendell

Length of metal is 24 inches. Is there more info you need in order to find a replacement?

Thishandle from casement window is about 50 years old. I have many handles where the knob at end of handle has broken off. There are no markings that I can find on hardware or windows unfortunately.

I have 13 windows with broken shoes. They are 2" tall, 1.25" wide, .5" deep. I have attached a photo as well

Do you have any pictures of Caradco double hung aluminum clad top sash? Or is there a definite way to identify a Caradco window?

Hello,Unfortunately, we could not see the photo that you sent. If you could try to resend it or email it to our customercare@swisco.com with your discussion number D117094, we'd be happy to review it and let you know if we have something that will work for you. Thank you!

I am looking for the Millard siding door keyed lock. I want to replace my original regular one. Could you help me what I need in order to have a key lock ?

Will this tumbler fits what is in the photos. thx

Hi, I would like to order new channel balances for 3 windows. The balances are labeled as 32-5 GA2 CMC 5. I measured them and iit appears to be a 33 inch balance. I believe I need your 33 inch series 385 Channel Balance but not sure of the sash weight. Can you assist based on the pictures prov ... (cont.)

Im sure this is what i need, but how do i determine the correct weight specification,i have attached a photo of old sash balance it has a stamp 34XHD2, although when measured it is 35 inches long, please help, and i will probably order aproX 30 of these. Thanks!

A wing broke off of one of the balancers and needs to be replaced. I'll replace the other as well.

IAM LOOKING FOR AN LOCKING HANDLE FOR MY SLING DOOR WENCO DYK1GCC (R)CBA

This part is screwed onto the lower corners of the sash and fits into the pivot shoe which is attached to the swirl balance.

have a very heavy sliding glass door. door harder to close than open.put new rollers on from home depo that fit in. door still hard to open.suspect track maybe slightly bent.would a new track cover correct this problem or should i try a new track with new wheels?

Need new screen for the door

I'm looking to replace a few 26 inch long, half inch wide balances. Attached is a picture of both the shoe and the wing. I'm not sure which balance is the correct one to purchase.

Hi, my door does not have an exterior keyed lock, but would like to add one. What model number do you suggest? It?s an Anderson vinyl clad slider and when on the outside of the door looking in, the handle is on the right. Thank you. Robin

Canadian Patent No. 919213