Viewing all customer Discussions for:

Other

This window has an operator at the center of the window. Two arms extend out. Problem is the crank is messed up. The guts of the crank are loose and actually come out.

The product number is 975 EYERBR HYP

Wondering if you can identify this and where can i purchase a couple.

ITEM # G1628WLE FRAME DIMENSION = 1' 9 3/8" X 5' 4" SASH OPENING = 1' 8" X 5' 2" PRODUCT CODE #CD1U1-1628W GUARDIAN CLAD WOOD DOUBLE HUNG WINDOW BRILLIANT WHITE EXTERIOR FINISH MISSING: DRIP CAP & EXTERIOR WEATHER PROOF TRIM

Only the long one had a part number. It

Part is broken that raises the window and holds it in track

I have a house full of windows that won't stay open because of this part. I see many similar on your site, but none have the "oval" screw holes. There is a "4" on the part. The bar measures approx. 2-5/16" long and about 1-1/2" from the top to the center of the first oval and 11/16" from the center ... (cont.)

What part do you suggest for replacement

There are no markings on the balance. The length is 27" and I've included pictures of the ends. Thanks for helping!

I have window balances marked 11600-3 and 11600-17. I have two windows that need to have the balances replaced for a total of 4 balances. Can you find corresponding balances to replace? Do they come with the cords? Thank you. Ron

LH & RH surface latches,3 1/4 length,2 1/16 hole to hole,1 3/8 wide,5/16 thick,3/4 hole to sash edge, curved edges along lengths. Thank you

.Plastic retainer clip for Plygem windows. This sprig clip holds the screen in the frame.

I believe the windows are MI. Series 1480 / 9880HS . 12102 8707-1 I'd like a dozen.

I need weather stripping for Certainteed screens. There are numbers on the screen, will this help me get the right stripping?

Drawer slides for homecrest cabinets and the bracket they connect to on the back of the cabinet.

Hi could you please try and identify the attached channel balance. one of the two were missing from a bedroom window of a cancer patient housing center we manage. Thank You, Ron

Looking for parts for Denesen Vinyl Storm Window purchased in 1984. Looking for the ( spring loaded pins ) Also screen bracket, same window. I need the locking pins that side up & down. These are sliding windows. The pins are rectangle in shape about 4' long 1/4" thick 1/2 wide aprox. The scree ... (cont.)

Need door handle replacement.

need replacement crank. There is a vertical bar inside the left window jamb that slides up and down to lock and unlock the casement window. The lever bracket has bent and will not lock the window.

What is the name of the part shown in the picture? It attaches to the bottom of the lower window and is the seal between the window and casing.