Viewing all customer Discussions for:

Other

Hi, Home was built 1990 w/ all Certain-teed windows. The sash of our casement windows have the same part w/ the same number stamped in it at the top and bottom of the pivot side. It screws to the sash w/about 4-5 screws and has a pivoting guide that fingertip wraps around a stainless steel track f ... (cont.)

I have a Caldwell non-tilt window balance spring that needs to be replaced. It is marked as 25 4 FO CALDWELL. It is a 1/2" wide channel with a 26" length. It appears to be a 19-005 top and a 15-004 shoe (1 3/32" width). Am I correct that this would be a 26" S385 series balance spring and can you ... (cont.)

Has 7P27 stamped on it, would I replace this with a 737?? Thanks!

My windows are alum. frame , they have a lip on the bottom of the glass frame , they have a two piece handle that is spring loaded , bottom frame has a slit that the handle locks into, the handle is alum. the second piece is a pop metal with a hole on the outside on each end the latch has a round p ... (cont.)

Rollers not working.

I require anew screen door... the bottom roller is broken Acorn Series, 1200, CMHC no 6882 CGSB 82-GP-2A Can I get a replacement screen in Canada or please ship me a new screen

Our Cole Sewell door has the number 091699900400001 on it. The door latch is broken and we cannot find a part number on it. Please help!

I bought a house with some windows that do not have balancers. The window glass is about 23" and the distance between the top balance hole to I think you call it a Yale catch is 23". Looks like a 1/2 " wide balancer would fit. I don't know if the top holes should have clips or not since they don't. ... (cont.)

I have a broken latch and loose screws that cannot be tightened. I took it apart and I found a U.S. patent# 5125703 D340,398. This number is printed above the patent# 22650. Can I order a replacement from you? I am also having issues with the piece that locks and unlocks the door. The screws will no ... (cont.)

SMALL SLIDE FOR OPENING AND CLOSING BLINDS IN BETWEEN GLSS PANEL

The roller is in a rectangular holder that fits inside the bottom frame and is held by screws. It's on a 6' wide sliding glass door with thermopane house built in 1978 by Pond and Spitz in Medford NJ

Non-Tilt Windows MFG: PHP-28Series : 810SType: Single HungLabel on Channel Balance: 28 4 EW CMC 4 (I don't know how to read this. What does this say?)Mental Length: 29"Width: 5/8 or 1/2"Depth: 9/19"Top Attachment: 19-005 (with Wings. I am guessing here!)Bottom Attachment: 15-004 (13/32" depth. I ... (cont.)

can i just replace a striped operator shaft ? or I must replace the whole assemble ?

I'm looking for replacement Milgaard window balancers. Here are the two Milgaard part numbers: BA0901BT and BA0998BT Do you carry these, and if so, what is your price?

need a replacement sash a patriot casement window 2400 series left side. where can I buy a replacement sash?

I need replacement roller assemblies for a 2009 Glenteck sliding window Model 02022/G202. The existing rollers stopped rolling and now have flat spots. There are 2 rollers per assy. Unit flange is 1.5" long, 1.325 enters window and .015 deep. rollers are about .325 in diameter. Recess in b ... (cont.)

Do you carry peachtree casement latches. 35178010. Part nnumber

Hello, Please let me know if you have this part for the windows and in which part of your website I can find it. I need different sizes. Thank you!

Hi, wondering if I can replace the track for the sliding screen door. It is about 5 feet 8 inches long. Thank you for your time. Tim

I am looking for a square plastic pin used to hold a decorative cross are on each side, (cross bars are wood) Windows are 25 years old. Thank you for your help