Viewing all customer Discussions for:

Other

I'm looking to replace casement window operators for casement windows installed in late 50's. They are operated with square key stock bent into a crank. with a rotating metal spinner for fingers to rotate the crank. The operator has an arm about 12" long that slips into the track mounted horizontall ... (cont.)

The 27" Series 380 channel balance appears to be our match. Unsure which stamp option to choose. There is no stamp on my channel balance.

I am a sign maker in Flora Il. I use caps like this to finish my signs. But I need caps that accommodate #10 screws. Can you get that size?

I hope you can help me. I don't even know what these white plastic things are called, but they attach the window to the cords which ultimately attach to long springs in the sash (I believe it's called). Most of the windows in the house wouldn't stay open, they slam shut when unlocked, and I traced ... (cont.)

part no. 0FAD0000 A little white plastic slider part for Pella Designer series and Proline series casement windows. Comes in RH and LH. Do have have these available?

weight 3/4 lbs 29inches 0.56 diameters inches

ROW window crank age of window 45 to 50 years old, the dia. of the spline is .355, the spline has 12 segment's

need a screen door sweep for "241010607" .just under 3/8"

I have a truth entryguard 45179 stamped on gear L 31538 0n 8" small arm and 40753 on 9 1/4 long arm

Good day. I need some assistance in sourcing these operators but instead if the fold in handle (which I've found to be ridiculously faulty), I'm looking for a fixed operators with fixed handles. Can you assist ?

looking for a "half round" shower door bottom seal--preferably in gray and about 34" long--cost w/shipping to code 66604 in topeka, ks--thx

Attached photos are of a balance from a previously replaced (identical) window. The best I can tell the number on the part are E23 927 173 The house was built in 1973-4 and they are the original Anderson double hung windows ~ 36 w x 53 l. Can you please help me identify the correct part(s)? I wa ... (cont.)

need gray crank cover for casement window manf. around 2000

I have two 16" french doors that swing out. I am looking for a device that will open them both, simultaneously, when you push either the right or left door. Do you know what that device would be?

Simonton keyed lock handleset 2007 white

I have a MI window series 450 with a broken tilt lock and bottom balance

Do you have the part to replace this entire mechanism?

I need a pair of Anderson double hung window balance replacements

Hi, I need to replace two non-tilt balances on a 35" tall vinyl window so I'll need the S385-32, I believe. The number on the existing balance is 31 3 Caldwell. A window repair service was going to order FA3130 from another supplier but I decided to do it myself aftyer seeing his estimate and I've ... (cont.)

what rollers should be used for replacement on alenco patio doors from the 1980's.