Viewing all customer Discussions for:

Other

I need a left hand and right hand replacement door handle for door model PREM T&R 606. Thank you.

I have 3 different balances I need to order. Once I see these will fit correctly I will order for the rest of the home but these are broken so need them most. My issue is I do not know if they are S380, S385 or something else. Also the depth of the shoe is only 7/8" deep and your models appear to ... (cont.)

Milgard balancer identified as 26 6 JU CMC 2. Metal part of the balance measures 27 inches. With plastic pieces, it measures 28 inches

Milgard Single Hung Window MFGR: MIL-027-4 SERIES: 1521/2551/2571 MST: 4-6/7-6 MVT: 53" X 45" The balancer measures approx 22" long and 9/16" wide. The balancer is stamped with "20 4 CP CALDWELL".

---rollers on bracket that fits into a track. Triangle shape bracket--- 31/2 across top-- 1 3/4 side -1 1/2 on bottom. Brass 7/16- 1/4 thick. Rollers at the corner of each wide part. 1 1/2 bracket at the bottom which held a screw that goes into the door

I am looking for vintage casement operators that have a removable crank that has a square male end similar to a fire place key .it inserts into a female opening that is flush with the face of the apron below the sill and turned to operate the arm. the arm attaches to the sash with a round pivot on t ... (cont.)

need replacement balance will 770 work this one is 1/2 wide x 9/16 depth does metal shoe # 15-043 come with this

I'd like to know if you have replacement door rollers for an early 1960s vintage Alumiline Constellation 580 aluminum frame sliding patio door. The rollers are still installed in the door so I do not know what they look like.

I need to order a door sweeper for my screen door #C179032

larson door hinges left

Purchased used Chris Madden Collection tall chest of drawers. Need to find replacement drawer pulls and knobs. Do you carry these replacement parts?

I am having trouble identifying my replacement window latch Please help me identify it. See photos Thanks

I am looking for replacement tilt locks for a single simontron window.

I need to replace The bottom rollers on my mirror closet doors. Attached are photos of the existing rollers. The concave wheel is 1/14 inch diameter, the bracket height is 2/12 inches, and the width is 3 inch.I would appreciate your opinion of what would be the best replacement. Walt M ... (cont.)

I need to replace the Glazing bead/spine on a Wenco JX-7 double hung window. window glass is double pane 28 7/16 x 28 7/16 and about 1/2 thick. this was one solid piece. I cut in half for you to see. both sides should look identical but you will see in the pictures that one side is damaged and mis ... (cont.)

1/2" wide. Overall length is 26". 24 2 IP Caldwall is stamped on the part. Little help identifying a replacement part number.

To Whom It May Concern, I have 3 sliding windows manufacturer by TRACO. The place of the windows were installed in the year of 2002/2003 for The Concord Condominiums at NW Washington, DC The reason of this e-mail is that the air leaked from outside into the unit...not airtight anymore. It ... (cont.)

Siding door lock on interior of dor

Trying to figure out which model would work for my application. 1/2 inch wide, 17 inches long, marked 1620F Thanks

I have a 2004 MW Patriot window with a broken left side pivot pin. The pin itself isn