Viewing all customer Discussions for:

Other

The lock handle broke of

Hi, The spring in my channel balance seems to have broken the pulley block at the top of the channel. I'm having trouble finding anything similar in your listings. This is for a single-hung, tilt-out window. There's a cord that runs from the top of the window frame to the channel balance. The lo ... (cont.)

bottom window

Not sure what it is called... But, my tilting double hung windows have a pin that serves as the pivot point that has rusted away. It screws into the wood frame of the window and fits into a hole in the plastic shuttle in the spring loaded mechanism on each side. Is this something you carry? ... (cont.)

Need to know size of a spiral spring balancer for a 3'0 x 6'0 tilt storm window. thank you.

Do you have a replacement for Marvin V626 weather stripping?

I have two broken windows that need replacing: Bottom panel with the following numbers I can find: 14064901.1, 26 3/4 x 28 x 3/16 Top pane with the following numbers I can find: SB996, 85682300, CCMC# 12579-L, CSA CAN 3A440-M90 I need the correct ordering numbers for these two windows ... (cont.)

Looking for a window lock for a 1980 Anderson double hung window

I am in desperate need of a patio sliding surface door pull for both the inside and putside...I also need the lock and I am thinking keeper that fits inside

I have double doors made by Vistawall and I need the brushes that seal between the doors. there are two on one door and are about 1/8 wide and 1/2 tall and slide into a grove in the door.

Would I need part 15-015? Want to replace the spiral balances also, they are 29". Thanks

I have an American Craftsman 35.75 in, x 37,25 in. Series Pro Double Hung Vinyl Window with Buck Frame Model 3638786. the Sash Support Coil Balance has broken, the on;y identification on the spring is 6CK. what part number do I order?

Old window /screen retainer fastener or retainig clips /metal threaded inserts for the clips

I lost one of the white external weather stripping pieces on a bathroom window I was re-installing. It is a groved strip that runs the perimeter of the window. The Number on the window is AQ9W9 30116632-03-0001 T.R.

The hardware has no part number but it is a 2-part closing mechanism locking on the side and into the window part. I need to replace the keeper in the picture. Also all of the wing pieces are snapping in half and need replaced as well

Frame weather strip, Pella 3682 Architect Series Classic Model 2

I could not find any identification on the snap-in glazing bead from our windows. The glaziers that replaced our double-pane windows identified the glazing bead as Alenco. Using the sketch provided, would you tell me if you have this glazing bead (or equivalent) in stock. Thank you. ... (cont.)

17 3 AO Caldwell, length 18".string is broken

I would like to replace all of hardware on my Thomasville dressers. I've attached photo. Can you help ? Thanks

I need 10 window balance ub 28d The attachment is 15-005 thank you!