Viewing all customer Discussions for:

Other

Hello I'm looking to get a quote for backing with 4.75 mm (.187") & Pile Height @ 38.1 mm (1.5") x 1000 ft rolls

Hi, my name is Jim and I have a rusted out by-pass closet door system in a mobile home. The bottom track is shot and I need to know which track will work with your #23-026 bottom sliders. Thank you. PS. The door opening is approx. 47 1/2 inches. The door hardware is made by ACME. Thanks ... (cont.)

I plugged into the Swisco search bar a code from my Narrowline window balances, S 16 1027 5 88. That code led me to your 24-R18-1027, or your 24-R14-1027. I have two questions. 1) Which one of those fits my window? And 2) Does "R" stand for "right"? My balances have the same code on both ... (cont.)

Can you tell me the part number of this pivot shoe? It has a protrusion which I do not see in the others. It is 1/2" w/o protrusion in most areas but 5/8" in others. I will be in South Jersey this Summer so I could potentially bring on in. Also, do you stock all lengths of 5/8" spiral balances? S ... (cont.)

I am looking for balances for a top sash in a double hung window. The Manufacturer is Farley and these windows were installed in 2002.

Found gold label on top of door. Info on label is, Manufacturer stipulates conformance to NRRC 100/200 code PAT(VA) spec NFRC series TWVPDR MST 6068 NFRC PAT-M-037 Appears to be a Swisco lock on door.

im looking for 4 replacement cranks...the old ones are aerodyne with a W underneath the arms are 9 1/4 inches from tip to center of mounting body..the button is about 3/8 th inch

Looking for replacement handle set on Pella 02240590505748

We have a Cole door model #11179796051-88 with a broken handle, can't find replacement at any hardware stores any suggestions?

Looking for a upper metal drawer slide for a older dresser.

Hello, we have Andersen double hung windows that were installed when the house was built in 1986, and several of the sash cords have broken. I watched your video about replacement of the sash balance and it looks simple enough; what do you need from me to identify the correct balance for my windows? ... (cont.)

I have the part which you say matches your 32-088. I need several drawer track guides which measure about 2 1/2 inches wide and1 5/8 inches from the highest point to the bottom. The part was manufactured by Hardware Designers, Inc. and has the number 452 USA on it. The slide opening is 1 1/4 inch ... (cont.)

hi,would like to know if you have the fuzz insulation and if I can replace it

I need a handle for a 36" Unique Designs Solution screen door bought at Home Depot . Thank you.

Cord is broken on left side of 2004 Gemkraft home window

I need at least a dozen of these little keyways I do not know what they are called sincerely Anthony -- Sincerely Anthony, ATLANTIS CONTRACTING INC.

I have a aluminum extrusion with weather stripping and it has two double wheel roller assy's that I believe are 1"dia.rollers.As the wheel assy's are riveted to the aluminum rail this must be replaceable as a unit. I spotted a piture on the internet of the same unit ref. Please advise...Thanks ... (cont.)

looking for (4) complete sets of window crank assemply made in 1986 stamped 45002. Please contact ,Carlos Velasquez at 512-218-8200.So that we can make arrangements for shipping.

I am looking for a replacement latch for the door on the upper left side of a Young-Hinkle Gentleman's Chest from the Windjammer collection. Please let me know if you have the part.

pins to hold screens in place # on screen is AX7164