Viewing all customer Discussions for:

Other

I have 2 sets of channel balances that I need to replace. One is a 16" without the attachments and 153000H stamped on the metal. It looks like it had 2 wings on the bottom shoe but one is broken off. The second is a 28" without the attachments and 274000H stamped on the metal. It does not look l ... (cont.)

We are hoping you can identify with these photos the exact type of mechanism used and tell us how we might be able to remedy the problem. Closes but then reopens slightly. The drawer box width is 21 inches

balances needed

I have several windows that are missing the sliders on the tilt latches. These are Jeld-Wen windows. Do you have this?

This coil balance is for an Alside Excaliber CT ETC double-hung window. Spring width is 0.5". There is a code "8K" stamped near the lower attachment end. Is a #152-8 coil balance correct for this window? Thanks!

We have an apartment building full of patio lock sets like these.

Need a patio door sliding door locked. Length is 7 1/4. Do not want a keyed lock. Want one with a handle. Color White. Otherwise your item 82002WKP would be good.

replacement for the part in the left... thank you

We purchased 2 of the 90-252 - Latch Mechanism from you but it didn't come with screws. Unfortunately 3 of the old screws were lost. Two local hardware stores could not match the one we have. Any chance you have them for purchase? They are 3/4" in length and seem to be #9 width? I say 9 because #8 ... (cont.)

Hello, In the first photo, the red arrow points to the window sash/seal that is missing in the second photo. I would like a replacement for the plastic sash/seal.

Rollers are from an Alside Excaliber #6106 CT ELITE patio door. Dimensions (housing and wheels): Length 3.124", Width 0.75", Height 1.0", Roller 1.26". From searching your website I see that the 81-030 or 81-138 seem to be the best matches. The 81-030 matches the roller diameter, while the 81-138 ma ... (cont.)

I need a track for my closet door 59 in long 2---60 lb doors Dimentions in pictures Thank You John

replacement

Hi! I have new windows installed. The crank seems metal and sturdy. However the other pieces are all plastic. I am looking for a stronger replacement. The below info is from the quote and I have attached pictures. Looking for black hardware if at all possible. Thank you for any guidance! SWC2442 CP ... (cont.)

Where can I get end caps for ducana double hung windows.

There is a 6 on the top and 861 on the down leg

Hello, looking for Nu-Air part 52-843, I'm pretty sure by Google Lens search. Your system gives 87-233. part needed is 1.75"long. your part is 1.25" long. Can you confirm for me that your shorter part will indeed function properly in its stead? My main concern is the screw holding the frame together ... (cont.)

Hello! Hoping you can help. I'd like to order the following circular lock and pin mechanism. Currently the lock spins but the pin does not move. Thank you!

hi, need bottom track 9 ft long , triple sliding door ,

Good morning! I'm trying to find part on pictures attached. This is corner., looks like cast aluminum, with incorporated roller into it.