Viewing all customer Discussions for:

Other

The image shows the pin that has the tip broken off, so it appears shorter. I'm unsure what to replace with because all I see online are pins with springs. This one is a place plastic piece. I'm happy to upgrade to something more substantial if it will work. Any thoughts?

Looking for a rear cabinet bracket that snaps in are these still made i believe it's a right side Thanks

see also photos non-tilt wondow stamp reads 1990 B.S.I. OK 19

Hi I need to replace a broken coil balance, but can't find model number anywhere, can you help? Thanks so much

Not sure which replacement part to order

Interior handle is broken. Locking mechanism and exterior handle function as normal. Trying to find a replacement for interior handle. I can replace the whole set if need be. I am unable to identify what part I am looking for to replace handle.

Hi I have a question about a balance for non-tilted window. It looks most like a S395 but the bottom shoe has a slightly different shape. I think it is 1 1/8 though. Just checking!

I need 2 window openers (crank outs). 1 for left and right opening and 2 handles (11/32). I believe they are part# 39-031 and 32. Plus handles 39-114L. Can you verify?

The brand name of the windows is called Polaris double hung windows

Need replacement inside door handle for an EMCO 300 series ventilating storm door.

I see a number 6 or 9 on the coil.

Hello, my windows are from 1996 and the little plastic piece that lets me lower the window down into the room so I can wash the window popped off. I don't know which replacement to order. Can you help? Thanks, Carol Kviklys 856 630 6782 lskdod@aol.com

Hello, I need to replace the door handle since the plastic piece broke and spring fell out to hold door closed.

Crystal windows, window balamce

Attached are photos on the right sash balancer for my Anderson window (I think 200 series circa 1995). From review of previous posts I know 11600A-3 and 11600-17 are not the important markings. the photos show markings on the tab that look like 1131 1 BU 48 1293

I am looking to replace this patio door handle/lock that is on a 2000 Breckenridge park model.

I have Jeld-wen glass sliding doors (4 panels) and the dummy door handle broke off. The two screws broke and are stuck in the handle. In these pictures I tried replacing the screws but it's not working since the side it screws into is jammed with the prior screw piece. Do you have a replacement dumm ... (cont.)

Mfg date 12-2-03. Parts needed, spring balance with shoe retaining cup, tilt sash locks.

My thumb latch broke off. I tried connecting it, it will work but nothing holds the latch on besides the very little support it has from the lock guide. Which half of the section connecting those 2 is broke off. Not exactly sure how the thumb latch was held against the door in general but its the is ... (cont.)

Hi - my sash weighs 16.2 lbs - do I need the 7.5 lb coil, or the 8.5lb? Thanks!