Viewing all customer Discussions for:

Other

I need locks for crank out milgard windows installed in 1999. They are all in bad shape.

The hinges on our ESwindow Hurricane door failed and we need replacements. Please see photos. Thanks.

Hi we purchased an operator 39-031 recently and it is the correct arm but it appears the arms are not in the correct position??? We are currently trying to install but the arms are not in the correct positon. We tried to change the position of the arm but it doesn't work. Not sure if the operator wa ... (cont.)

Looking for metal clips used to secure the top window in a mobile home

Trying to identify the following channel balance: 27" length 1/2" width Marking: 86 26-3 GB5 CMC Non-tilt window Sash 18lbs Thanks for your help:)

I have 4 corner crank windows And the top arm has come off Not sure what to buy to fix it The 1st pic is my crank style 2&3 arm the arm that's off 4 is the top of another identical window so you can see arm attachment

looking for this product: Sliding Window Roller, 3/4 Narrow Groove Nylon,(Pack of 2) Where to find it?

Hi, we have a sliding window that won't latch. It looks Like it does but when I slide the window it isn't locked. It appears to be 2 5/8" long and 3/4 inch deep. The latch plate appears to be 1 3/4" long by 3/4" wide. Do you have a replacement? The brand of windows is EPI 4200. Thank you. ... (cont.)

10" ARM, FOUR BAR A.W. ANDERBERG MFG. L.A. CALIF. U.S. PAT. #3,345,777 CANADA PAT. #785527-1968

looking for that grey shoe with the green insert. The balancer is imprinted with 30B

plastic piece that snaps into water drainage opening to eliminate raw metal edges being exposed Opening is 1 &1/4" x 1/4". White

Looking for part number or description for replacement of this part. It is cracked and missing a side, so the casement arm is constantly coming off the track.

Please let me know how to purchase the hinge #30744 from you. Thank you.

Window is made by Windsor and all hardware is truth It has a three point locking mechanism. Little plastic piece with tape measure is issue If you also have right side wood sash let me know . Mine cracked a little bit I ordered levers a month ago for this project from you if that helps ... (cont.)

I have a window that needs to have a new crank window opening. It appears that the gears are striped and just clicks as you get closer toFully closing the window. In the winter it is really hard to manipulate it to a close position. Can you help me with the replacement parts?P S. Our home was a new ... (cont.)

The gear appears to have broken so it no longer holds the actuator. Except for removing the wooden trim it was simple to remove. Especially with the actuator arm off. Four screws hold the crank mechanism in place. No markings and no clue as to the window manufacturer.

I am looking for this screen corner and bought 95-187 and it did not fit.

I have an American Craftsman garden awning window. The crank arm and pin needs to be replaced along with the locking mechanisms.

I need replacement snap in glazing. Here is a picture of what I have, you can match this? Thank you, Maria

Hi Helper, Do you have this kind of weather stripping? This came off of a fiberglass door jamb