Viewing all customer Discussions for:

Other

please help identify this part.

Hello. Please help me ID the window operator and cover plate for my windows, images attached. Arm extension measures 2 3/8". Also, operator mounting hole needs to be to the right at the top, not centered. Thank you.

purchased balances from your company that did not work out I may need customs

I have the Weather Shield Pro Shield about 25 years old. I want to replace the seals and weather stripping. The # on the window is 980819000569005. My name is Keith.

Looking to replace screen clips that are missing on these windows

Need help ? need to replace handles. Need 2 of them.

The curved section is 1/2" the straight section is 5/16" Each edge has a small tab measuring approximately 1/8" Need at least 10 3' sections

Looking for a roller assembly or roller for a Viking Window. The part is 1 7/8 at the base, 1 3/4 tall, 1/2 wide. The wheel itself is about 5/8 diameter. Or if there is a substitute available that would be great. Thanks.

Attached are photos of our current window casement hinges. It's my understanding that the roto controllers are no longer available. What do you recommend to replace these with? Also is it possible to change these from side opening casements to an awning style with hinges at the top and a crank op ... (cont.)

Please can you help me find a suitable replacement for this lock

I need to identify the pictured spring and replace it.

I am looking to put a key lock on this door

We need 4 replacement wheels for our screen door.

Anderson window crank.i do need a left and a right.there is a number on the back 7191.2 Thank u

I need a weather seal for my sliding doors I think the measurements are 4mmx4mm which can be match with your =s 3/16" grey weather seal.

Attached is a photo of what I have with dimensions. Do carry this type? Regards,

Attached are photos of the one that needs replacing. It got all corroded and the top part where 2 of the screws go broke off. The main part is about 5 1/4 inches. (If that part was still on). The longer arm is about 4 1/4 Current long arm is 4 1/2. How important is it that the arm length match ... (cont.)

Hello, I'm looking for a window crank assembly for this Simonton window.

I am remodeling a 1982 mobile home. I need to find the closet door hardware - replacements or similar.

Hi there, I need to identify the piece that says Pat pending. I purchased a sliding door kit a few months back and if I can Extend the piece I can also have the door lock. Please advise. I've been looking for weeks and can't find anything.