Viewing all customer Discussions for:

Other

My mirror closet door has no identification label on it. I took some pictures of my mirror door roller wheel and attached the photos for reference. Any recommendations on what product to use are appreciated. Thank you Regards, David

Markings show 19 6 3.S.I. It measures 19 5/8" long (metal part only) It is from a Certainteed brand window

The locking mechanism on our vivarium has broken. We need to replace this so the left opening door will work

This is a broken hinge on a framed cabinet with 4 hinges. These doors get heavy used so need something stronger than a compact hinge. Even though a framed cabinet you can see a block under the plate that allows a larger 3-screw adapter plate. Hinge opens about 120°. I would like a soft-close hing ... (cont.)

288 c stamp on one end 29 inch long

Need four of the attached items that go on the bottom of my windows. Looks like each one has two wheels ( the picture only shows one but all the windows have two wheels on each side and a screw hole but also a flange to keep them from slipping. Can you help me please?Thanks,Sam

Hello,I have several sets of 70s vintage metal Bifold doors with hardware as shown in the attached picture and that uses an upper and a lower track. I just replaced all of the flooring in that basement with new vinyl planking and I don't want to drill holes in it to accommodate the lower tracks. I ... (cont.)

The picture is for a different window (and different size) in the same house. I think the length I am looking for is 21 inch

I have double hung tilt replacement windows that are 25 years old. The windows still work well but need to replace the weather stripping especially on the bottom. Picture attached of the seal. Do you have this type of seal?

Need replacement wheel for mirrored bifold door

I am remodeling the sunroom in my circa 1958 house, and I need to replace 3 left-handed crank mechanisms for 3 of the Jealousy windows (4' x 5') Windows. I have included pictures of the current crank mechanism and Windows.

I have an aluminum window that the roller is worked out. Can you help me find the roller.

I'm a home owner in need of cabinet drawer boot connector. Can you help/assist?

There are no names , numbers or other identifying marks. The balance is 25 inches long

Any idea what part I would need?

I am having a problem finding a ferrari part. GO25 is what I see printed on th part.From what I read these parts wear out and are very hard to find

NEED REPLACEMENT ROLLORS FOR KOLBE SLIDING PATIO DOOR AT LEAST 20 YRS .OLD

1. Length of metal channel: 23 5/8 inch 2. Stamp printed on channel: 23 5 3. From a Milgard window. Stamp on glass says 2005. 4. n/a 5. Desired count: 2

I need to confirm the block and tackle balancers I need for non tilt aluminum windows. The are marked 1920 and 1520. I also need the part that goes on the sash.

What's the parts I need for this?