Viewing all customer Discussions for:

Other

Hi! I need to replace this part. I need 2. It is from a sliding glass door from a house built in 1980. I have more photos if needed. The number 175 is stamped on the side. The library card in photo measures 2 9/16 top to bottom so I estimate the part is 2 5/8 long. Thank you!

I am looking to replace this broken handle. Interior white, exterior black

Im trying to identify a replacement for this wheel. The only markings on it are " PE DEL MAR" Please help. Thank You!

Hello I have a tenant with tracco windows and his top Paine is sliding all the way down when unlocking the window. I noticed it's missing latches. I'm not sure if it would be missing anything else too. Thank you

Hello, Ordered Part #39-031. All the measurements match up, but the swing arm divots down, instead of up. It won't sit flush. Can you provide any advice? Thank you.

Need to replace both lower and both upper corner braces/rollers. Model Number on door back is 50221032. Thanks in advance for your help.

Catch broke and can't open door from outside

I need new coil balancers, shoes, and pivot bars for both the right and left side of this window. Let me know if you need more information.

my doorknob is loose?I believe it caused by a failed spring to hold it into position. Will you be able to help find the spring or replacement for the knob? Thank you!

Weatherstripping from slider doors, possibly weathershield brand.

Can't find any numbers on parts

I need to replace the outside seals around my bow crank windows. I looked on your site and didn't find any that looked like this. Will you be able to help me find replacement seals? I installed this window about 20 years ago. I ordered and replaced the window latches from you last year. Keith ... (cont.)

Hi,I'm attaching pics of kitchen cabinet hinges. I've been doing a Google search, but nothing is popping up. No identifying marks that I could see. They are attached to Aristokraft cabs but most likely are another manufacturer. Your help is appreciated.R/Sam

Can you please tell me what I need. Thanks

I'm looking for a Anderson balance. It's a 950. Is there a cross reference?

Working on a house i believe was built in the late 60's and windows appear to be original however cannot find any marking or part numbers of any kind. Any help would be appreciated

Here are the pictures you requested to assist in the replacement . The strips are 1/2 inch and fasten under the outer edge of the window. The windows were manufactured by General Aluminum, series 1100-1450-1550-1900-H-R30. Does your company carry these replacement strips. Thank you very much for you ... (cont.)

Looking to obtain two of these rollers.

Hi, I am looking for the seal that goes around a plexiglass. I have added a picture of a cross-section.

Can you help me find these brackets for our Tractor sliding windows. They are about 12 years old. If the window is closed with the locking lever in the position shown it can break the tabs on the bracket. Thanks for your help. Space between screw holes is 2-1/4" space between screw hole and top edg ... (cont.)