Viewing all customer Discussions for:

Other

Hello, I'm looking for the upper and lower latch mechanism for my french door. My fix-it-guy pulled apart the entire top assembly and removed the broken latch, so that is missing from the photo. It looked very similar to the latch from the bottom lock. The door appears to be vinyl and I don't know t ... (cont.)

26 5/8" long Stamp is 26 4 Window is H-LC30-48x78 made in 2005 Need x2

Part no S-900-19619 windows were installed in 1987

Hello I'm looking for the window balances for this window. See pictures.

I have two Simonton windows that need new coil balance assemblies. One is 30x52in and the other is 27x50in. I've identified that I need: -4 https://www.swisco.com/Pivot-Bar-2-1_2-inch/pd/Tilt-Window-Replacement-Sash-Pivot-Bars/26-083 -4 https://www.swisco.com/coil-single/pd/Sash-Support-Coil-Balance ... (cont.)

DBL-H00-G is the number on the Wartian lock. We need to purchase the interior handle as it is broken or purchase a whole new handle. The handle has a 1 5/8 door thickness. The number 0040 is on the interior and exterior connecter, connecting the indoor handle to the outdoor handle. ... (cont.)

2" X 1 1/2" WE NEED 8 ROLLES

I measure the balance as a width of 1" and length of 28". The shoe has a width of 1 3/32". My sash weighs 17 lb.

Pat #: 6.264.252 Pat #: 5.820.170

Hello, we are in need of a crank out window crank, all we tell you about it is that the guide which is still attached to the window is 11 1/2 inches long, the opening in the window where the crank goes is 4 inched wide, the mounting holes that are visable on the window are two sets, the holes furthe ... (cont.)

Markings on the Pella Sliding Door ICCC CBA IGMAC Insulshield CIG-2 1-02 I purchased the Swisco 83-128 as I thought I had checked close enough and I hadn't. I am at a lost for what type of sliding door I have and what part(s) I need.

Looking for a replacement for the uppers handle everything else is fine

Looking to replace this pella operator. I'm told it's 1960s. The arm measures 16". Thank you!

Old Grisham door and need a new handle set. Grisham discontinued the one I need so hopefully you have something I can use. Thanks Sheila

I'm trying to get some replacement hardware for Truth casement windows. I ordered a 39-315 which had the same measurements as the one I have but it doesn't crank open as much and does not have the same color available. Any idea what item # would match?

I am looking for a latch cover for the latch mechanism in the attached photo.

b2740 and b2730 I couldn't find a top and shoe that matched what I have.

Slightly over 25" 1/2 end of frame to frame.

Need replacements for Window side locks, left and right. 2R,3L

hi my name tony im looking for this locking mechanism, i repair trucks for a living and keep my house function, im also advance scuba diver living in ventura cal, im always looking for advice and wisdom. any help would be appreciated thank you