Viewing all customer Discussions for:

Other

I am looking for vinyl wlndow bead. Exposed dimensions of the bead are 5/8 inch wide by 1/4 in deep.I don't know the window brand.

Crank popped out of casement operator, stripped threads. I need a replacement, but see no manufacturers name or model #. Any help with replacement would be appreciated.

Looking for replacement screen door handle, no manufacturer's name on door. Attached are photos inside and outside. Note the inside is screwed on the side of the door, while the outside is screwed flat on the door. The distance between screws is 3 and 3/8 inches. Thanks.

Need Gaurdian sliding door replacement handle BS6206:1981 16cfr 1201 11 CAN/COSB-12.1-M

HelloI received order number 2125720 for parts 39-187 and 39 105 I have replaced these parts on another window in previous years and still is working well . this one i replaced and the retainer clip keep slipping off even after i lock in place i crank window in a few times and it slips and i have t ... (cont.)

Hi! One of the balancers are broken at the top I believe. Having said hat the metal rods are very rusty as you can see. The rod is 6;inches without the plastic top and bottom. Can you help me out? Thank you!

This part broke it goes round the pivot pin. Thanks

Need to replace hinges on an old Pease Industries exterior door. They are 4" square cornered with a door plate that is smaller in width than the jamb plate. Refer to pictures attached. Looking for 3 sets in Brushed or satin nickel.

do you carry a replacement for this.

Looking for (2) wheels for a older door. On the wheel I found S&S BRD.p/n DWB 43 The wheel od. is 1.400 / .475 wide. the wheel is nylon. I attached several pictures to held identify it. Thanks

Picture attached of handle & locking systemText

Good morning ? I was hoping you could help guide me to the parts I would need to fix my older but in great condition screen and storm windows .. I've been searching everyone for the nylon slide bolts but I can't seem to find the exact ones .. I'll not sure if they just don't make them anymore or if ... (cont.)

I'm looking to replace the old metal channel guides in my old window jambs with a more energy efficient guide. Can you lead me to what I'm looking for? Please see attached photo. Thankyou, Scott

can you help me identify these parts

Do you know who makes this? I need the parts for 1 24" side 2x 12" Ken E

I am re-screening my patio sliding screen door. I am trying to find a replacement handle and keeper. It was a bit difficult to remove due to not being able to disassemble the latch that hooks onto the keeper. There is very little information to be found on the glass sliding doors, but this may help: ... (cont.)

Hi would like to purchase 1 set of 2 of the rollers for our patio door. I would like the best replacement wheels as possible. Thanks so much

I'm not finding these any where they are a nylon duel bering but they are 41/2:inch long

Need two of these "latches" for a window in my daughters condo in Seattle, WA. See attached photos.

Hello looking for replacement door handle with lock. Do you sell these?