Viewing all customer Discussions for:

Other

I have a broken window hinge, of of the pins attached to the window is stripped. I am looking for replacement parts for the hinge or a new hinge.

Please see pictures below and let me know if this is sufficient to make an assessment. The piece removed from the window is long, but I thought you needed to see the end piece. Please advise.

This sliding spring lock is for an old Milgard window.

Looking to get replacement coil balances for 2 new sashes. Purchased these from SWISCO in 2015 and looking to purchase the same type.

9/16" diameter roller 3/8" wide with an axle 3/8" in diameter that protrudes on each side 3/16"Oh, I need 4 of these rollers.Thanks for your help.Bob

"WRD" IS ON ONE SIDE AND THERE IS A 5 ON THE OTHER SIDE

Hi there - I'm hoping to find a replacement for this exterior French door hinge, to avoid having to replace the door. Thanks in advance for your help!

My front storm door handle is broken. I need a replacement door handle that will fit the existing holes. The door maker is Cole Sewell, registration number of door is 11019696042 304.

The lock will not "wiggle" out and lock. locking hook stays inside the door.

Can you please identify this Swissco equivalent replacement balancer. Part is 3" wide by 6-5/16 long, with a 1/2" long mounting tab. Each Window sash is 24" wide x 32" long.

I need help finding a replacement for a 5/8" top sash guide (aka sash cam). I have attached pictures of the broken sash guide and a markup of pictures of one of your sash guides showing the dimensions for my sash guide. Thank you,

Can I get parts for a guardian sliding glass doors rollers and track cover

These strings hook to a plastic block that the window hooks into I need the assembly

Good evening... I just received from your company two 84-100 screen door rollers that supposedly would replace the bad ones I currently have on my Alside patio door's screen door. While I have pictures I can share of the old one alongside the new ones I received, your new ones are a tad too thick, w ... (cont.)

Do you have this vinyl extrusion?

I have a 2019 7700 series casement window I can't find the left casement operator. It's a single arm 9in in length and has a joint at 4 and a half inches. Thanks

Please help in trying to determine if you have something to replace my broken pivots. The 26-373 or 404 look to be close but mine are plastic/ ceramic? I don't know the brand of windows, there are no markings or numbers visible. All vinyl

Hi I measured the track at 3/16" by 3/16 approx pile. I'm attaching a photo of track for your advise on product to order. Someone threw out existing pile. I believe it's 58-021 thank u jim

Please advise on the above photos. 20 plus years old balances need to change. Your site has been very helpful. Thank you.

Maybe for Krestmark Series 4000 double hung window , keeper looks like it will slide to adjust to align with the window lock