Viewing all customer Discussions for:

Other

I need the replacement handle for my Millard sliding glass door I think the door was installed in the late nineties or early two thousand

I'm currently renting a house and this morning the interior lock turn knob broke off of the sliding door. It's not equipped with an exterior lock cylinder, and I can't find a model number on the door anywhere. The etching in the glass tells me it has 2006 Guardian glass in it. How do I figure out w ... (cont.)

Hi, we purchased the home in 2022 and the slider is going from the dining room into a sunroom that used to be part of the deck. So my guess is the door was an external door from 1978 until 2001 when the room was converted. I took the rollers out and cleaned them up so they work better but should pro ... (cont.)

4 photos attached.

Looking for this plastic piece with screw

The handle came off and was reattached, but feels loose.

When closing the door, the lock falls down into the locked position. The lever will not stay up. We think it's a Vinylpro or Provinyl brand door which is no longer in business. Do you have a part that would work for this door?

There are 4 plastic clips on front of Kinco window that need replacing. Can you help identify part number?

Milgard windows. Non tilt. Approximately 13 years old. I need: 2 with Channel length 16 7/16 and Stamp 16 3 2 with channel length 28 5/8 and stamp 28 5 2 with channel length 26 5/8 and stamp 26 5

Hello Guys, My Patio Door Lock-locking/unlocking part, broke down/part sliding up and down/and fell down into the frame.The length of housing is 7" 1/4 and the door is 1" and 5/8 thick. Original lock has # NW 1720-1 - TAIWAN. Please help me identify the lock, so I can replace it without moving the l ... (cont.)

I have six of these windows, need two latches each to replace broken. Help please?

Hello, I have a customer looking for black weatherstripping for his Andersen casement windows. The reason he wants black weatherstripping is because he had his windows painted black and the paint won't stick to the weatherstripping. I have attached pictures of the weatherstrip needed and a pic ... (cont.)

Please let me know the right part number for my sliding mirror

I am looking for kitchen drawer guides

Hi I'm one of the building maintenance men for my church located in Boardman, Ohio. We have Thermalux windows installed in a couple areas of our building. they are aluminum frame tilt in's with spiral balancers (35 Inch long). I would like to know if you have a distributor in my area or can the ch ... (cont.)

Looking to replace these balancers, will need a quantity of 2. Channel length is 36", color is a tan/beige. Please let me know if you need additional information.

I bought from you 2 of S500-40 Black tip but they are to big, I am returing. I need to purchase 2 springs see picture maybe you can help me figure out part number

Looking for replacement channel balance - block and tackle for 1800J series single hung window

looking for a replacement part

Help to select the right Simonton Window Non-tilt, ChannelBalance #3440, 35" metal long, 9/16"W, 7/8"D. Thanks, Fernando