Viewing all customer Discussions for:

Other

3 1/4 long 1 1/2 high 5/8" wide plastic individual bearings

No Markings, see pic for dimensions

My lock is broken on my sliding glass door and I don't know how to repair it and I don't know what brand it is.

Balance system or Pivot Lock shoes for a double hung window manufactured by thermal industries. It's the part that holds the top sash up(double hung) from just dropping when unlocked. Markings : 16E BS1 V

One side of our window lost the metal snaps in the channel that holds the balancer allowing the window to slide up and down. I need those two metal parts.

Strings broken, so probably not run correctly. Cannot find brand name on window. Channels have 2040 stamped on them. Each channel is 21" long.

This is the only info I have

Single hung window balance spring broken, it reads: "25 5 AX CMC 1" on the side of it please let me know which one to purchase. Thank you.

The left pivot shoe on my window fell apart. Looking for a replacement. Thank you for your help.

Hi - We have Anderson french doors in our shore home that was built 30 years ago. The rollers snapped off of the sliding screen door. Do you have something that we could use to replace these, so that we don't have to replace the entire screen door? Thanks for your help! -Donna

It's the interal piece that goes it the door and latches. Only identifying info: INTERLOCK PATENTED 5,951.065

Door weatherstripping

Hello, I need 4 replacement rollers for two United series 3131 vinyl patio doors. These doors were installed in approximately 1991 when the house was built. Photos with measurements are attached. Can you let me know which replacement rollers I should select? Thank you!

Truth entry gard 20810 are legible on the operator arm

Hello. I need help with identifying these rollers for my patio door. There are no identifying numbers, just the word Ultra stamped on it. I hope we can figure this out. My patio door is very difficult to slide. Please let me know if you need anything else.

The last time this was fixed Anlin windows tech left one set of spare springs marked SA 497 (or maybe 407) & LA 407. Looking for replacement spring and maybe the other associated parts if needed.

I'm assuming I need a 12 lb spring. Need both sides - is there a left and a right? Please help!!

Length = 27" Width = 1/2"

Need to make sure I get the right crank assembly

dh-b1-hp is on frame.