Viewing all customer Discussions for:

Other

I THINK THESE WINDOW HAND CRANKS ARE ABOUT 20 YEARS OLDCAN YOU HELP FIND THEM I'M LOOKING FOR TWO OF THEMTHANKSMIKE

I am looking to replace this broken part. Do you know where I can find one? Thank You

Which part is the correct replacement? #s on it are 11600-17 531 J24 699 Is product code 24-531 the correct replacement?

Sir/Ma'am, I'd appreciate any insight on the attached photo parts. My Bella sliding retractable screen door no longer latches shut, in the fully retracted position. I suspect the part in IMG_1384 latches into IMG_1387. In other words, the "small c" which is attached to the door latches into the "big ... (cont.)

Hello, could u pls advise me what Series of Channel Balances show I buy? length of the metal channel is 31". also the current channel is marked with 30DS 38BSI VO Tnx

Channel length (metal bar only): 25 3/4 " Window weight: 19.8 lbs Balancer width: 1/2" Total depth of bottom fitting: 1 3/32 " Width of wings on top and bottom fitting: 7/8"

Looking for this piece for a sliding glass door. It latches in 3 places. Looks like a mortise lock. Any help would be appreciated.

Looking to replace the window cranks on a few windows in the house that don't operate any more. The house was built in the late 80s and with cranks say K&K it looks like. They also say Entrygard Truth and some numbers 20810, R30842. Those number can be found in the pictures I sent over. The pic ... (cont.)

Need to identify the correct part numbers to replace these 1/2" x 29" channel balance and top sash guides.

Need to identify the correct part to order for replacing these channel balances. Markings on the slides 24 4 GO CALDWELL

Locking door mechanism needs to be replaced on existing patio door handle assembly. Can you recommend the parts or assemblies that I will need for this application

Looks like a 7" shaft and a center operating crank handle.Questions/ call

Do you have this replacement

I have an EMCO SN 0009296397 and I would like to replace the lock case as the door latch spring is very weak and door will not always latch. Do you have a replacement?

Sliding atrium screen door. need replacement weather strip where when screen door close it meets the fixed door on the vertical

Marked as "Unique 28-G-70

The hinges are from the late 1960s. They are Pella casement windows.

I would like to order 12 of the screw on white plastic locking bar retainer clips for our VPI sash windows please. I can be reached at Thank you in advance for your time. I can pay via company CC. Regards,Dave

I am looking to replace several awning window operators for my Milgard classic windows installed in 1998. There are also a couple of left hand and right hand fixed casement window operators that I need to replace. Can you please tell me the corresponding parts I would need? I have attached a phot ... (cont.)

Need a few of these for a dresser drawers. These are 3 inch wide