Viewing all customer Discussions for:

Other

These vinyl tilt replacement windows were bought from Home Depot about 8-10 years ago. I couldn't figure out how to remove the tilt latches to take a photo of the inside. The window locks are 2-3/4" wide and the screw holes are aprox 2-1/8" apart.

Hi I have older Harvey windows

I need a replacement lock for my Marvin double hung window. US Patent #5-110-165

Numbers on part: 20 4 HT CMC 4 21" long metal piece, 5/8" x 1/2"

Length of metal channel is 26in and 1/2in wide. It is printed with 25-9 A05 CMC 1 on the outside of the channel. I need one replacement.

I'm looking for replacement clips for my 26+ yr old full-view storm door.Unable to find a replacement locally. Don't know the name of the door manufacturer. Offset appears to be just under 1/2 inch.

Refer to pictures for all markings and measurements. Thanks

Need to know if the part is available and if it can be replaced so I can save window.

The lock mechanism has failed. Thank you

Hi! I have a sliding Pella patio door. One of the wheels on the bottom is broke. Can I replace it? Thanks! Here's the door info: CTG Tempered 160FR 120 1ll SGCC 1804 1/8 U

Approximately 2-1/4 x 1-1/8 x 5/8

27" Series 385 Channel Balance Can you please confirm I'm looking for 16 balancers I can send more pictures Thank you Jaime

Hi, I am trying to identify this seal, can you help tell me what it is?

The inside door latch has broken off. It was installed in 1963, and we can not find any info on it.

I need to purchase two channel balances and want to make sure I order the right ones. Pictures are attached. Thank you. Susan

I have a couple units in a 1969 condo and the weatherstripping needs to be replaced. Please see the photos below and tell me if you have replacement material available

29" x 5/8"

Please reference the pictures to see if you can help us identify the correct insulation to order. They appear to be 5/16" and there's a piece of felt that remains in the groove on the window, which has be separated from the white strip provided. Thank you! Barry & Peggy

The metal case is 20 5/8 inch The wings are a little bit more than 7/8 One engraving says 20 4 The other says isa tc

I need to replace several broken /rusted cranks. Photos ate from a functioning one. PGT impact glass windows installed in 2007-2008.