Viewing all customer Discussions for:

Other

Hello. I have a home build in 2002 with wooden sliding glass doors. I am in need of seals along the top and sides of the door frame. Attached are pictures of the seal with a total of 1" wide at the seal "ears" which are on both sides of the seal. Channel width is 1/2" and 1/2" deep. Neither the door ... (cont.)

Hi, I'm looking for replacement drawer guides for and American Drew Cavendish Court dresser. It measures 2" wide and about 1/4" tall for the guide space as it accommodates the wood guide. Overall measurement is 3 1/4" wide and 1 3/4" tall.

Hello, these little plastic clips were attached to the edge of the window sash. I guess they are spacers to reduce the noise when the sash is sliding up or down. Are there any replacements for this item? Thanks. Rich

I'm looking for a replacement bracket for a bay casement window. Pictures of the broken bracket are attached. If there is further info needed, please let me know. Thanks.Ken

Do you have these? The pin is 3/16

Trying to locate pgt window balances for 2 sizes. What is the procedure?

Looking for the small plastic block used as a guide on either side of the lower part of the window to keep it centered as it slides up and down

Casement window operator is broken. "Truth" stamped on operator arm, approximately 9.5" operator arm. Visible numbers inside operator are 45108, and pat# 4-840,075. Window is 16" wide and only opens about 45 degrees before the window frame hits the operator arm (see picture #2). Is there another ope ... (cont.)

Hi, I recently ordered the window pivot lock shoe #15-179 : Pivot Lock Shoe, 9/16" Thick. It seems to be the correct size for my window however I cannot fit the pin in the slot. Is it easier to try to find another pivot lock shoe to fit the pin that is very similar to #26-352 with a round head. Or t ... (cont.)

The metal channel measures 19 15/16". There are plastic wings on both ends. We would like to purchase 24 of them, or if there is a bundled amount in a box that would be economical that could be fine. My name is Michael. If you have any questions about the pictures submitted and supplying us the corr ... (cont.)

Metal Channel is 31.625 Inches The channel is stamped 31 3 Unknown manufacturer Need 4 balances

Need to price replacement channel balancer for a window. 30 inch metal c-channel. Looking to replace these.

Hello I'm missing several window cranks. Do these look familiar and do you have any?

I need help finding this part or one that can be used in its place please.

Looking for 2 large awning roto operators

I am looking for Caradco window cranks Item no. 8999995 C-200 single arm op. LH and RH I need three(3) of each. Please quote me price and availability.

I have some old wood casement windows that I would like to replace operators on. Single arm 9.5 inch crank through the screen frame. Need left and right for two windows. Picture included. Laurence

I am looking for this particular window tilt latch that you squeeze in with the other tilt latch. There is a close-up in one of the photos. Thanks.

The gear mechanism is jammed up, And the splines of the pinion screw for the window crank are stripped out. I'm looking for a new mechanism

Aluminum, ~.050 thick