Viewing all customer Discussions for:

Other

Need replacement...crank gear is stripped. Thank you.

Channel has a stamp that reads 185 HQ Caldwell. We want to be sure we're ordering the correct part. We need two.Thanks!Ryan

Handle snapped off. Do you have replacement? If not, a replacement mechanism?Thanks

I am looking to replace casement window crank/ hinge hardware and screens on existing ROW windows. I've included photos of the operator mechanisms. 8 of the sash are 19" (3 rights 5 lefts) wide and 7 are 23 3/8" wide. (3 left 3 right) there are 7 screens @21.5" x 49.25". 4 screens @17" x 49.25". 2 s ... (cont.)

Roller has a V stamped on side of roller. Dimenions 3-1/8 long ,1-1/8 high, 3/4 wide,roller diameter 1-1/4

1/2 inch wide, 24 inches long channel balance with numbers 2330 for double hung window. Thank you!

Thank you for taking my call yesterday. I'm looking for a new handle and mortise lock. The handle is 10.75 long, the door is 1.75in thick, and the setback is 2" An Amesbury 98.02 is the right size. The old one has a 2" setback. Thanks

Hello, Need assistance identifying the correct replacement parts for a Simonton Double Hung 35.5 x 53.5 Contractor Series Window from 2005. I believe I have the correct Tilt Latches identified?#26-243 (LH) and #26-244 (RH) ? need 2 of each for top and bottom sash. I also believe I have the corre ... (cont.)

I believe this comes from a Hurd window. Truth hardware with #14d500p stamped on it.

Two different tracks, a B.S.I. 23HD and a B.S.I. 25HD Would need two of each to rebuild the tilt window top and bottom. Also would need info on how to remove the tracks from the jambs. No visual screws or pins hold them to the jamb. thanks. Bob

Hi I am refurbishing my parents old house. I have Milguard single hung windows (30x54) with broken springs. Other components good. Springs are 8" long and a tad under 1/2" diameter. I need two. Availability and price? Thanks Tony

I need to match these

Hi, I need the crank assembly along with the part you can see on IMG_0088.jpeg that is labeled "Truth 30818" for the left hand side assembly (two pieces, top and bottom).

Holds a spiral balance in place in the window and is mounted at the bottom on both sides. I think it is handed.

159Main - Single Hung Aluminum Double Glazed Windows https://www.swisco.com/page-id-part Need replacement for a channel sash balance that is very similar to the 350 Series. It is a 1/2" channel x 40" long. The printing on the channel is "39-15 CP5 CMC 1", and the spring (coil inside a coil) is ... (cont.)

I have already sent another "expert" this info and have heard nothing back. Hopefully you can help. Enclosed is a pic of the original with stamp and a replacement i got based on google searching the number, obviously the incorrect one. Can you help? Note the original has wings the replacement one d ... (cont.)

channel 19" stamp says 1830 - 8SI or IS8 EL

I need 10 each The pivot locks . I also need the tilt lock mechanisms for 10 windows if they are right and left ones I need 10 each I also need to know how the balancers are connected to the pivot locks of the window and the name of the window if you can furnish that I am a regular customer of yours ... (cont.)

These date from 1997. I'd like to buy new covers since one split

I'm looking to replace broken balances on single hung vinyl windows from Jeld Wen circa 2005. There's no stamp I can find on the parts. Also some broken sash cams from same. Ken