Viewing all customer Discussions for:

Other

I am trying to replace a window shoe but can't do cut out method it is metal, need help with a cheap alternative to jam spreader. Also need new foots for the windows and identifying which ones I need. The one broke off inside and can't get out, but while trying it got pushed in and seems to be out o ... (cont.)

Broken window latch. Appreciate your help found the parts.

Double hung window can't hold in place. Found pivot bar missing in one side, broken in the other side.

Door I think is a kolbe 25 to 30 yrs old

Looking for sash pivot pin for single hung window Pivot Bar, 3-1/16" 26-226 Picture of broken part attached, dimension of 1 3/8 seems to match

Self adheres to latch side of sliding glass patio door to seal when closed. Self adheres to jam (entire length). White about 1 1/4" wide. Thank you

We have an 18-inch long, 3/8-inch dia., red tip, block and tackel end older window balance and we need 4 replacements. We have ordered the wrong ones and need what will work, thank you for your help, we have company coming soon. Sincerely, Jim

The wood door handle in 7 1/2" long. The mounting screws are 4" apart No markings

Can you help us replace emplacements hinges # 3462900300

I have no knowledge of the age or manufacturer of my vinyl replacement windows but am searching for replacement seals for the horizontal sash.

Hi, Please see attached. Do you know which sash balance I'll need for this window? Also, can you recommend anyone or local company to help with the replacement? Also what is an estimate for the replacement (labor only) Thanks!

Hi, I am looking to replace the snap in glazing on my windows, however I am having a hard time identifying the new part that I would need. The current piece is approximately .5 in h and 3/8 in wide. Thank you!

Hi you what can a hardware is it

I have several failing casement window operators, both left and right hand, that I need to replace. Can you tell me what part to order for this size, please? The numbers are 30830 and 30842R on the arm. Thanks

I replaced the balancers but one window has a broken Top sash guide. I have include pictures. 5/8 x 2 1/4. Im thinking 18-008 might work. Thanks for your help. Rich

The plastic tabs that sit on either side of the lower section of our double hung bathroom window have disappeared. Strange, I know. The bottom part of the window no longer stays upright and we cannot lift it up as there is nothing to hold it in the tracks. I would like to order more tabs, but do ... (cont.)

I'm looking for a replacement part for a Pella Architect Series Inswing French Door - Passive/Active 71.25 x 80.125 multi point lock. Can you help? Thanks.

I have a 22-inch length (of the metal itself) window channel balance that looks close to Series 351, but for two problems (1) Although the length measures exactly 22 inches, the metal stamp says 2220, which matches only the 23 inch one and (2) the shoe is a different size -- substantially smaller. I ... (cont.)

I'm looking for a replacement for the shoe in the picture. It works with a spring balance and a tilt window. Think the windows are Thermo Twin, made in 2004. I can't find any special product labels or marking.s

Hi, Could you help me with a part # for these? Measurements 1.25" x .536" x 2.12". Barrel has to accommodate slotted/circular frame pin ( see Pic). Thanks.