Viewing all customer Discussions for:

Other

The clip to hold the crank out arms. Certineed

the metl only portion is 28 inches long and the width of the shoe looks to be 1 3/32 wide. Only thing im not sure of is the sash weight and spring load requirements

Pella widow, sash is 17.25" Bottom sash is 18.25", both coil springs broken on bottom sash.

Handle is broken, will open but not close. Want to replace the whole part. Need 3 one right and two left. Thanks

Window repair

The window is from Home Depot. As shown, the tab to pull back the latch broke off. I'm looking for a repair and how to do it. Can you help?Regards Ron

Hello, I tried posting this but it didn't seem to work so I decided to email you. I am looking for a window balance sash. The sash is 29 inches long. I need eight pieces and would like to know if you have it available and how much would it cost?

14" long pivots in the middle to lock window in. Aluminum 3/8 thick 5/8 wide

I have a Huntington Vinyl Double hung window made by Kensington High Performance Windows. Photo 1: Broken Coil Spring, on the darker spring portion note tiny hook that connects to the Pivot Shoe. Photo 2: Type of Pivot shoe in my window. Photo 3: Coil housing with the cover removed. Number 8 R ... (cont.)

I need a new roller for my patio door. The door is most likely from the 1960's, but I can't find any brand markings. The assembly is 13/16" thick, 1-3/4" tall, and 3-1/2" long. The wheel is 1-1/2" in diameter, and it's concave to sit on the track. It mounts in the bottom of the door. ... (cont.)

Kinco, LTD - Jax, FL Mark 40/50HP H-LC30-53x96 H-LC30*/50*-53x63

We have a new sliding glass door that we want to replace the standard interior lock with an outside keyed enrty lock an need help identifying the correct hardware to purchase ..

The ones available at Home Depot do not have the same measurements.

I need help finding replacement rollers

need 2 balances for lower sash

H 12310 I believe its called a window pivot . I need toorder 8 of them please

Need replacement

What would be the recommended sash balancer replacement for this part. Two numbers found: 11600-17 11600-3

Hello! I need some help identifying and replacing my non-tilt window balance. One of the two balances recently fell down the window frame as I lifted the window to open it (vertical up/down opening, not a sliding horizontal left/right). There was a broken cord/string inside that fully came out of th ... (cont.)

Sliding patio door handle