Viewing all customer Discussions for:

Weatherization

We have a lot of these commercial doors that have this weather-stripping on the door jamb I would like to price it pero if I could please or anything that would work just as well using the same aluminum trim

I need about 950'

Help I would like to find weather stripping for my exterior door. I have attached some images. Thanks Meghan

Weatherstripping is 'plastic', material is ~ .0205" thick the folded part is ~ .54" wide, the 'hook' part is ~ .25" high and ~ .093" thick (that part fits into groove on window). Looking for a large length of this material to replace all weatherstripping in six windows. Need to replace in both uppe ... (cont.)

Trying to figure out what replacement parts are needed to fix or replace these balances. I would also like to replace the bottom weather stripping at the same time if we can figure out the window type. Thank you so much!

0010 027581/001 pro780. 28/6 G 5155 271/2 x35. White

Hi We are fixing our storms. Some of the grey pile is disintegrating.... we tested out a scrap of new grey pile with a plastic fin down the middle from a friend. its about 3/16" at base and 3/16" tall with the fin down the middle. It looks like your 58-021. see images attached. Do you think ... (cont.)

I want to replace the worn out Kerf weatherstrip with new white weatherstrip. I will need 5 lengths. I'm guessing the lengths are 82" or longer. Thanks,

3/16 x 3/16 white vinyl weatherstrip with gray fiber

Hello pictures is pile weatherstripping with 2 plastic sleeves on the inside do you carry this type ? Thank you. Tim

i need to replace the weather stripping on 5 doors all 36" wide and 1 3/4 thick. I believe the doors are masonite but not sure. See photos. The door shown is one door of a pair opening onto a deck. Thanks Richard

I am changing the white pile weather stripping on my windows and am having a hard time installing the new piece on the sides since there is no way to start it. Do you make a tool for that?

Hi, I have 2004 year Caradco aluminum clad wood casement windows and all the weatherstripping is going bad with dry rot. I live is South Florida and would like to try and replace the WS with new and keep the windows. the window has the following information: ANSI Z97.1.1984 16 CFR 1201 C11 CLC-1 ... (cont.)

We have triple track storm windows 1968. Some of the grey wool pile is missing or crumbling. We have a sample of some from our local small hardware store that seems to slide into the channel OK. Unfortunately they are on vacation for a few weeks so I cannot purchase directly from them if they ... (cont.)

Do you know the width of the channel for weather stripping on casement windows manufactured by Milgard? I would like to order some from you if available. I just need to make sure I have the correct width measurement. It appears to be 1/8" but measured from the 2 inch mark on the tape measure but I n ... (cont.)

I am looking for oversized weather stripping for a 8' double front door. The slot that holds the weather stripping in is wider than standard weather stripping with fins. There are no markings on the door.Thank you for any help that you can provide.Kindly,Chris

Looking for replacement weatherstripping. Thank you

It seems like certainteed from back in early 2000s.

My daughter recently bought a house in Buffalo, NY. The windows were replaced approximately 10 years ago by Sound Solutions in Chicago as part of Buffalo's Quieter House due to the proximity of closeness to the airport. The weather stripping is about 1/2 inch wide.Sound Solutions went out of busine ... (cont.)

The attached photos show the bottom weatherstrip for a Stanley door that is about 50 years old.Can you identify and supply the part?Thanks,David