Viewing all customer Discussions for:

Weatherization

I need a weatherstrip for this screen door.Door maker is unknown, It is a 6' slider. The strip slides into 1/4 to 5/16 slot on the edge of the screen.I think the old weatherstrip was about 1 1/4 to 1 1/2 inches wide. Can you help with this? Thanks Chuck

Looking to replace weather stripping for 6 millgard french door - made in 2003, out of warranty and discontinued by manufacturer. Windows are still in good conditions. Can you help me find the parts? Thanks

Hello, original strip (not the channel)I have = 7mm x 7mm What is your suggested strip to buy? Are your listed sizes width x height?Thank you for responding, nice thing that I thought does not exist anymore. Actually I need to replace on all windows and one patio door. Both for windows and door th ... (cont.)

Will the product code 58-182 and 58-183 fit and seal the same window. If so, which seal is considered the best to use. My original windows appear to have the 58-182.

I am trying to replace all of the seals on the windows on my new home. there are no identifying marks on the window so i don't know the brand. These strips have all cracked and are hanging down when the window is open. They slide into place. There is foam in the circle and also in the strip abov ... (cont.)

Need help identifying

Hi. We have to replace our slider rollers. We took out door and found the rollers on your site. The bottom casing needs to be replaced also as some of the weatherstripping is gone. It is a square 1" metal casing with an Foam and rubber insert. Do you have something? The slider is Malta. ... (cont.)

I am needing the weather stripping that goes around the window this window. This part reads "Roto G2-STRKR-*16 Thanks. Bradley

I ordered the 58-050 Gray wool pile which is 7/16

should the same size foam be ordered as if it were standard hollow vinyl?

Hi! I wanted to know, are we supposed to pull out or leave in the bottom string on the 58-014? Pulling it out makes it more "fuzzy" and less stiff, but I didn't know that it could be done until one of our workers (who knows sewing and works with fringe that you can pull the bottom string out) ment ... (cont.)

Hi, This is a part of a sliding window. To me, it looks like there are two parts glued together,but because of sun, they separated. I would be happy to find anything that may fit that small channel. There is part number or anything. Hope you may help me find the part. Thanks, Milosh ... (cont.)

I have Alcoa Windows that were manufactured 6-9-1994. They show to be a model 2V2H9L, which are single hung windows. The Spirals have white tips. I'm also looking for the weatherstrip that goes on the bottom of the sash against the sill plate. It attaches to the bottom of the sash. Do you carry ... (cont.)

No Markings Original French doors part Metal cased French doors with blinds sealed in dual pane window

I'm replacing weatherstripping on my 35+ year-old aluminum windows. The track in which the window rides appears to be 1 1/32" wide (maybe 1 1/16" in some places) and the windows themselves are 7/8" wide. The windows take pile weatherstripping in 9/32" channels on both the inside and outside. 1. W ... (cont.)

This is the lower seal that I need to replace on all windows

Hello, I have Patriot vinyl windows and I need to replace the insulation. The insulation is white nylon/fabric about 1/4" wide with a small white plastic spline on the back side. Looks like a T. The spline goes into thin cuts in - both sides & across the top of the window.

I purchase the wrong bubble seal for my windows,# 58-055 2 bags, and I am not sure which one I need. I purchased them last winter with the intention to repair them this summer. The bubble looks like 1/2" at the flat side, the slide lock is 3/16".I hope this is enough information. Thanks Harold Jenki ... (cont.)

need w/s 5/32 backing with 1/4" high pile Gray color 100'

Which weatherstripping do I need for these 1993 windows? I'm guessing 3/16 x 3/16 for a start. Thanks!