Viewing all customer Discussions for:

Weatherization

Hi! I wanted to know, are we supposed to pull out or leave in the bottom string on the 58-014? Pulling it out makes it more "fuzzy" and less stiff, but I didn't know that it could be done until one of our workers (who knows sewing and works with fringe that you can pull the bottom string out) ment ... (cont.)

Hi, This is a part of a sliding window. To me, it looks like there are two parts glued together,but because of sun, they separated. I would be happy to find anything that may fit that small channel. There is part number or anything. Hope you may help me find the part. Thanks, Milosh ... (cont.)

I have Alcoa Windows that were manufactured 6-9-1994. They show to be a model 2V2H9L, which are single hung windows. The Spirals have white tips. I'm also looking for the weatherstrip that goes on the bottom of the sash against the sill plate. It attaches to the bottom of the sash. Do you carry ... (cont.)

No Markings Original French doors part Metal cased French doors with blinds sealed in dual pane window

I'm replacing weatherstripping on my 35+ year-old aluminum windows. The track in which the window rides appears to be 1 1/32" wide (maybe 1 1/16" in some places) and the windows themselves are 7/8" wide. The windows take pile weatherstripping in 9/32" channels on both the inside and outside. 1. W ... (cont.)

This is the lower seal that I need to replace on all windows

Hello, I have Patriot vinyl windows and I need to replace the insulation. The insulation is white nylon/fabric about 1/4" wide with a small white plastic spline on the back side. Looks like a T. The spline goes into thin cuts in - both sides & across the top of the window.

I purchase the wrong bubble seal for my windows,# 58-055 2 bags, and I am not sure which one I need. I purchased them last winter with the intention to repair them this summer. The bubble looks like 1/2" at the flat side, the slide lock is 3/16".I hope this is enough information. Thanks Harold Jenki ... (cont.)

need w/s 5/32 backing with 1/4" high pile Gray color 100'

Which weatherstripping do I need for these 1993 windows? I'm guessing 3/16 x 3/16 for a start. Thanks!

What do you suggest to help me seal this window?

ATTACHED IS A COUPLE OF PHOTOS FOR A BULB WEATHER STRIPPING IM HAVING TROUBLE FINDING. IT IS FOR A CASEMENT WINDOW, AND THE WINDOW STICKER IS TOO FAR DAMAGED TO GET ANYTHING FROM IT.

Hello, can you please help me idenitify a replacment weatherstirp for the screens in my house? They run down tracks facing the windows which look to be about 3/16" wide. The pile is about 5/8" or just under 3/4". I've attached a few pictures showing dimensions. The windows are vinyl but the scre ... (cont.)

Do you have plastic plugs to keep rain water out of verticals door frame members as used on the Amarlite Anaconda doors?

Can you help identify this door sweep? Thanks! Andrew

I do not have a model number (windows were installed prior the purchase of the house. Quite a bit of weather strips have to be replaced (bottom and between windows. Please advice the part number and the size of them.

Hello Swisco, I've attached three photos to assist in identifying the appropriate replacement weather seal for my 1986 vintage Marvin wood windows. It appears to me that your product # 55-106-6 would work but I need your advise to insure that I'm on the correct path. I appreciate any time that yo ... (cont.)

do you have replacement weatherstriping for schuco windows?

Rubber seals for9047 LR 49-6 Transom window

I have recently replaced my windows and am in need of replacement bulb seal. I was told that you guys carried this product so I am enclosing a sample to match up. If you do handle this item, please respond to me at the following email address so that I might place and order.