Viewing all customer Discussions for:

Weatherization

I'm in need of a replacement shower door sweep. I've included a picture of the aluminum hinge part. The sweep goes up to that and then the seal slides into them both. I'm having troubles finding one.

I have 70s-era sliding windows (aluminum) that have worn piling. I'll attach photos. The base of the pile appears to be 1/4 inch. Can't tell the height because the pile is so worn down.

I have Simonton Dimension One Series casement windows. The current weather stripping is foam with no offset. Would the Kerf mount bubble seal 5/16", part # 58-053, work as a replacement or do you suggest a different one?

Hello, I received the rollers you guys helped me identify and they're perfect. Now, if you can help me find the correct wool pile and bubble seal, I'll be back in business and, once again, have a sealed and quiet door. Attached are four photos showing the pile slots and cross section of the 'square' ... (cont.)

I need to replace the weatherstripping on my Certainteed vinyl windows. The weatherstripping is white, 1/4" high with a 3/16 base and a double fin. Your website shows the 58-127 weatherstripping. Does it have a double fin, and if not is the double fin necessary? Thanks, Jim

These are old storm windows, probably installed in the 1970's. The photos are the best sample I could find. Most other places are shrunken/disintegrating. For the weatherstripping/wool pile that I need to replace, I measure the width of the base as 3/16". But the height seems to be 1/8" or l ... (cont.)

We believe this was on the frame, opposite the hinge.

These come in 10' lengths would like to know if I could get just the rubber seal on a roll have the metal strips.

Hi, I am looking replacement patio door weather stripping. Please help me find right replacement. Thank you. Tarmo

Although my weatherstripping (3/16 X 3/16) for my double hung replacement windows is not particularly worn, I have always had cold drafts in the winter and would like to replace. In looking head on at some of the windows, it is apparent that the windows don't fit the openings as they should ..... f ... (cont.)

Here's a better photo of the weather stripping in need that goes into a tight channel at the bottom of the sash. I can't seem to find one that looks like this. Any help you can give would be greatly appreciated.

Please help me find this bead.

Looking for a replacement for this

This is the outer seal on a crank type window with wood casement. The concave tip comes in contact with the edge of the window and is supported with a thin rubber strip on either side connecting to the molded plastic base. Any help in identifying this strip or providing a possible replacement wou ... (cont.)

Do you have this weather stripping?

Do you have a bubble seal to replace this? 5/16".

I have weather shield windows and i have the attached weatherstrip that I am not able to buy anywhere. Please help me find the similar or equivalent weather strip. Thanks, Naren

I ordered two bottom rollers for an Anderson Sliding patio screen doors from you. Part # 84-070. They fit perfectly. I need the weather stripping for that the doors. I measure 3/16 wide by 3/8 for the wool. But I do not find this in the list. My measuring may not be so good. Can you tell me the size ... (cont.)

Hi, I need to replace the weatherstripping on my windows, and it seems that the existent weatherstripping has a base of 0.25" wide but, the pile that faces the outside is taller ( 5/16" ) than the pile around the window facing the window frame (0.25" ). I have 17 windows, 2 panes per window. Each ... (cont.)

We have double wooden 7' doors with a 1/4 inch gap. Would like to install a weather strip, it currently has none.