Viewing all customer Discussions for:

39-094 Andersen Straight Arm Operator, 9 3/8" Arm

Has the number 67 stamped on it says Anderson Windowalls bay port Minn 55003 also stamped is letter L need help finding right replacement one thanks

?

Pics show window with arm disconnected & other pic shows working window

Andersen casement window left crank operator. Needed. Cannot seem to locate this one on the website

Anderson

Hello. I have this same style of window with the same Andersen operator. Is there an easy way to replace the 39-281 shoe on the operator?

There are no numbers on crank. i have pictures of the crank, complete with ruler to give sizes. Please llet me know if anything else needed for replacement.

These parts are broken on my casement window. The hinge is on the left side if I'm looking at it from the inside of the house

Hi, I'm looking to replace the hardware on 6 bay windows, side hung, outward opening. They don't have any markings or brand names and are original to the house built in 1976. I can take additional pictures of the window locks but I would prefer not to remove the openers until I'm sure I can find a r ... (cont.)

Need part number

Hi this window operator is stripped and I need to replace it

Need the whole window crank and arm assembly

I need a right hand straight arm window operator in white to replace the existing damaged one. I cannot seem to find a match in the catalog. Any help would be appreciated. Thanks Steve

Customer ServiceI need to replace 2 of the plastic crank body covers for Anderson windows, as in the attached image. I have included an image of the underside with the number 7191-33.If possible, please identify the part number in your stock.Regards,Nick

Hello Looking for a window crank

Looking for replacements for two right and two left windows the far is approximately 10 inches long that pushes out the control unit is for and a half inches wide by about an inch and a half tall

Length of straight arm is approximately 9 1/2".

Looking for the whole operator mechanism, looking for what model number it is

Can you please help and identifying this part please! Thank you!

The (3) images show my original Anderson operator, and specifically the arm offset (dropping-down by about 3 mm). I bought from Swisco your part # 39-027E which would be adequate, except it does not have the arm offset of my original Andersen model. Swisco operator part # 39365 would likely also ... (cont.)