Viewing all customer Discussions for:

39-094 Andersen Straight Arm Operator, 9 3/8" Arm

Hi, i have this window that the crank is broken and the bottom of the window track also seems to be broken for the crank it looks like its the 39-095 can you help me find the track for the bottom of the window?

Do you have available the replacement window operator for the Anderson window from 1930s. Roto-Gear Operator Detroit No. 2320 (1936 - 1945) Brass swivel on end of operator arm. Roto-Gear Operator (1936 - 1960) Amerock No. 2320

Both left and right arms, bases and cranks need replacing. Arms are broken or cranks and base don't work. Can we salvage window with new hardware? Only number I see is 99 on the arm. Windows seem quite old.

Good morning - I have a circa 1980 andersen casement windows that have 9 3/8" straight arm openers on them. Do you sell just the guide on the end of the operator that slides on the window rail?

Looking for operators for these two windows. Thank you Craig

Window dates to the 1970-80. Right hand viewed from out side.The arm is 9 3/8inches.

Hi, I recently bought a house with two windows missing the identical handles. They appear to be missing the spline too. Because the weather is getting colder and they are the 2nd floor, I don't wish to open the windows to see if a brand is inside the jamb. Will you please advise if you can identify ... (cont.)

Greetings from E. Tennessee!We need to replace numerous Window Crank/Gear Assy.'s for our Anderson Casement windows and I would appreciate any assistance in selecting suitable replacements.I have attached numerous photos for examination.Anderson Crank/Gear Assy. # 7073B Left & RightLength of Arm ... (cont.)

Looking for help to identify this operator. Thank you.

Arm is 9.5 long. Also need the lock. Need both left and right operator and two lock s

Window operator latch is broken

I have some older Anderson casement windows that are in good shape, but with worn out operators. I'm unsure where to measure the operator arm, so I included a tape measure in the shot. Can you identify the operator I need?

Hi, I need a new crank assembly for this window. It's an Anderson.

Hello, I'm in need of this type of crank. 2 with arms going to left ans 1 with arm going to the right. I seen similar on your website but not really sure.

Anderson windowalls, bayport minn "14" L, are the markings on the top. 7191 2 is the marking on the bottom. I need complete left and right operators with handles and covers

The markings on this window are, a triangle with AW inside of it, on the left is the letter M on the right is something that looks like parentheses {} right underneath it is E6,at the bottom of the triangle is a V circled with 4 quarter round lines.Also the corner of the cover is broken, this may be ... (cont.)

Do you carry such a piece?

These pictures are from an old but still working window in an old apartment building. The handle is missing and probably other parts. I don't know the window manufacturer. I would like to just put in a new operator. Can you tell what would work as a replacement?

Just want to make sure I get the right gear... We need part for a right and left window. Also could use a small bag of control-handle knobs. Can you assist? Thank you.

Anderson left side casement window, arm looks like almost 10 inches long.