Viewing all customer Discussions for:

39-107 Truth Hardware Operator Cover

Trying to order the right parts. I see Truth stamped on these and a couple different numbers. Could use some help ordering the right parts

Don't have a pic with it installed

Several numbers written on parts, 20810A and 31368 on one and 20810, R30842 on the other. Original problem, window wouldn't open when turning handle and then the handle fell off. Thank you for your help.

I have a casement window with truth parts, probably 30+ years old. Original to the window. The window cranks open but the crank doesn't work at closing. There are multiple part #s: 6993, 20810A, 31538A on the 3 parts. See photo. I think the gearing has worn and I need to replace those pieces N ... (cont.)

Looking to purchase a replacement Operator for our casement window. Stamping on long arm is L30841 Stamping on shorter arm is 20810 Stamping on lowest arm is 6N89

Thruth entry gard 40755

Looking for a new window crank cover that's missing. the other picture shows what the cover looks like.

Need casement window crank. Window opens to the left.

I'm looking to replace the handle, plastic guard and the left crank for product 31538. Can you help me with which products to order. Also the handle and guard are beige. Thank you for your help. John

Is need replacements for these two things : #1 - Casement window operator - the crank/arm mechanism that opens and closes the window#2 - Casement window lock / locking handle (the handle + rod that locks the window shut)Here's the information i have on the windows : It's a casement window that opens ... (cont.)

There is 31272 on the arm. Truth Entry Guard and 30985 wit X over the numbers. Thanks!

Stamped with the following info: Long arm: Entry Gard TRUTH 30470 L.H. Short arm: 30849 (NOTE: link is 2 13/16 inches) Base plate: TRUTH Pat. 1982 I thought the Entry Gard 39-031 would be the match, but the short arm link dimension is longer (4 7/16 in) than what I am replacing. The Egress extra sh ... (cont.)

Would like to find out what type of parts I can get for these windows. I need weather stripping, turn handle casing and so forth. Weathef stripping is probably the most important thing right now. These windows were installed in 1995. Thanks.

The crank spins freely and the housing is cracked. I disasembled it last year and reassembled and it worked until this year. I'd like to replace the entire mechanism including the housing if possible.

Hello, where I purchase a new roller and is there procedures on how to replace the roller? Thank you

I have quite a few to replace. Some RH some LH

I am missing piece to my Windows

I am looking for both left and right hand sides of this Casement Window operator. The detached component was from the right side, and the left is pictured still attached. It appears it might be a "Truth EntryGard 15 Series Split Arm Operator" but this is just from AI and I am not having any luck fi ... (cont.)

Could you help me identify this casement window operator? Is it be Swisco p/n 39-036?

There is the word TRUTH with a little house icon on the inside. No part number . The plastic is 5 1/4" X 1 1/8".