Viewing all customer Discussions for:

39-107 Truth Hardware Operator Cover

Hi, I have a few cracked Semco window crank covers. The width is 5.25 inches. Do you have replacement parts? Also, I couldn't find any screws or fasteners holding the cover. Can you provide instructions on how to replace. Thanks, Darryl

Crank just turns and nothing happens? Help!

I'm sending pictures per your request to see if you can match a crank up for our windows. Need a left and right hand if available that will match up. All measurements and part numbers are listed for the windows in attached ipicture.. Let me know if you can match the crack and covers for both sides. ... (cont.)

Its a Milgard casement operator. Do you stock this. Getting parts from Milgard is like pulling teeth.

I have Certainteed casement windows installed in 1995. The window crank covers are cracked. The underside is stamped Truth. Will the 39-107 cover replace this part?

Just replaced the Operator with Code 39-032. Seem to have lost the operator cover. What is the part number to replace the cover? Color brown.Thanks

I'm looking to replace the operator mechanism and the clip attached to the window. Prefer a white, fold away crank. It would be ok if the window had to open a few more inches. Can you suggest the parts? Thank youTom

I am looking for a crank operator for a Crestline casement window.

I need a right and left hand mechanism and covers Do I have the correct parts in my cart? Thanks

Hi, I need 4 crank covers (see picture one). 1 in the bronze color and 3 in white. These seem to be Pozzi/Jeld Wen casement windows (see picture 3. I also need 1 new locking hardware (see pictures four and five for a complete one). Picture 2 shows the window lock that is missing the lever. So, ... (cont.)

House in Wisconsin will go on market soon and want to have all windows in working order. I'm guessing I can't just replace the gear but rather the whole mechanism.So, NEED (1) mechanism to fit KK mechanism (the house built in 1952) AND (6) mechanism gray plastic coversCan you help me? QUESTI ... (cont.)

does this dual arm operator 39- 032 accept a 11/32 handle? If so, does it come in bronze and have the locking screw to hold the handle in place? Thanks, Cliff

45273 crank mechanism, L31539 short curved arm about 3 1/4 inches, 20748 connecting arm about 3 inches, bar on sash is 11 3/8 inches, stainless guide is about 10 inches.Main arm is about 9 1/2 inches long.

Marvin Casemaster French window vintage mid 90s

i need help identifying this window crank. this is the right window and the left is one is missing. previous tenants broke it and tossed it

Looking for this part for a 10 years old Marvin casement window. The handle is a non folding handle (the new cranck have a folding handle. I am not sure if the cranks are the same or the older ones (the ones I have) are different.On the arm it stamped: Truth 40754 R

Need parts for my bay windows. I included pictures. I think I found the parts but wanted to make sure if i am ordering the right ones.

Hi, I believe these were on our Scherer Brothers Windows here in Minnesota. It just says Truth Hardware on it with no number. These are plastic and cover the mechanism that opens and closes the windows. Thanks for any help you can give me.

It has number on it looks like 30841L on the arm that comes off the gear. Thanks

Need the following - in BLACK if possible:Jeld-wen window crank and covers - 20Jeld-wen window lock levers and trims - 40Lincoln (Truth?) window crank and covers (integral covers?) - 3Lincoln window lock levers and trims - 6Can you help me? If Black is not available then I can powder coat them.Thank ... (cont.)