Viewing all customer Discussions for:

39-107 Truth Hardware Operator Cover

The Entry gard piece indicates R for the piece need in bronze. We took the number from the left side window. Also we ordered an operator covering braze and we received bright brace instead bronze. What is the next step in returning the operator cover to get the BRONZE? Thanks Dothlyn ... (cont.)

Can't find any markings to ID the window or the operator/crank. Both left and right cranks seem to be stripped. Right crank can screw right out of the operator mech. Any help is greatly appreciated.

I need a cover like the one attached. Please let me know if you still carry these and if not do you have one that will work. Thanks Sherry

Hi - I need to do some work on my Truth cranks, but I'm not sure how to get the plastic covers (39-107) off without breaking them. They don't seem to want to come off easily. and I'm afraid I'll crack them if I'm not doing it right. Suggestions? Thanks!

I need to replace the Cover that goes over the working parts of this crank. I measured and the piece is about 1" high and 5" wide., Needed in the color shown in the photo

Good afternoon - the crank assembly in one of my house windows has gone bad. It no longer cranks the window inward. This is a left-side opening window, with part number R30842 stamped on one of the arms. The housing has worn away and cracked, which I assume is part of the problem. The crank arm ... (cont.)

I want to replace the old operator cover 39-107, with the new style 39-107FK. I was wondering if they are the same size, before I place an order, I want to make sure the new one will cover the hole of the old one? Thank you for your time! Steven

frontwindow and bay window

I think that part I need is 39-035. Hope you can identify it with attached photos. Thanks Dmitry Patent

White plastic cover that fits below the crank arm.

The arm says...Entry Guard, then there is a picture of a house on it and then the word TRUTH is on it and is underlined. There is also a number that is 20810. The frame of the window is wood and I believe that they are original from the 1970's

Hello, I need replacement parts for the window crank hardware shown in photo. I need two of the covers that pop on to cover the gear - color as shown in photo

Hello. I need a replacement for this Truth casement window operator. It is a dual arm and probably was manufactured around 1990. I looked at the Truth web site and the closest there is the Entrygard Dual Arm operator. But the gear for the smaller hinged arm for my part is not located in the same pl ... (cont.)

Do You carry these pieces thank you Daniel Lombardo

Hi - I'm looking for: 2 hand cranks, 1 plastic case and 1 "gear" which attaches to the window crank. The gear is in picture 3. Thanks in advance.

Hi, I need to find replacement parts for two vinyl crank style windows. I need a replacement crank handle and two locking mechanisms. I believe the manufacture is Empire Windows (Now Cascade Windows?). I attached an overall picture and a close up of the sticker. Thanks!

Need replacement part \

I am in need of some replacement parts for a window at our office building. I believe it is a Caradco unit, would be over 20 years old. I've attached pictures of what we need. Can you tell me if you have these parts and if so the cost.

Want to replace covers and handles of 1983-1 Marvin casement windows with folding handle and covers. Quantity 3 - 2 right hand and one left. Marvin states that Part 10814854 (ant. brass) handle, flip is correct part, but am quoted a price of $244 for each! Opening is 5" current cover 5- 1/8", cen ... (cont.)

Please find attached a photo which will hopefully help describe what I'm looking for. This photo is not of the broken operator, but it is a similar casement window (left-operating). The cover to the operator has "MW", which I am told is a PlyGem company. That section of the splined knob that ins ... (cont.)