Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

Hi there, I was hoping someone could review the following and let me know which part would be appropriate for replacement. I broke the "spline" I think it's called on it when I over-cranked it to close the other night, so now it will open but it spins out of the casement when I try to close the wind ... (cont.)

Hi there - I am not sure which replacement part(s) I need to fix the cranking issue. The crank works on closing the window, and only when the window is open a few inches (I push it out). The only info I was able to see are marked in the pictures attached. Please advise which part(s) I need to replac ... (cont.)

we have recently painted several windows in our home and are looking to replace the window, cranks and lever to match the newly painted color. The cranks say Pozzi on them, but also say truth on the underside thank you - liz

Need to find model numbers to order missing locks and cranks on casement windows. Windows were likely installed in 1993. Thank you,Ryan

Hi, What handles are compatible with this product: Product Code: 39-107 Thank you

several windows have bad hardware . the large spiral screw keeps coming out of the seat need help identifying the part

Can you help find the correct crank mechanism replacement for an older weather shield window? Thank you

need part number for Caradco window that opens to the right that we replaced in August 2018

We recently moved into a 1910 home with a 1988 addition that has HURD casement windows. At the moment, we only have one crank handle that we need to move around to operate four windows: Two windows with openings measuring 1'8 ½" x 2'7 ½" Two windows with openings measuring 2'5" x 5 ... (cont.)

Hi there, was hoping to see if you have a cross reference for this operator from Del Mar windows

Greetings,We don't know the model or the specific replacemnt parts. See attached images.Can you give us some direction?We need two right hand cranks and 2 left.Best regards,Jason

Pretty sure this is 39–317. I'm gonna go ahead and order it just to send me a confirmation.

I am looking for what I believe is a Truth split arm operator for a casement window. The number on the arm is 30744, and I believe this would be a left-hand model. The window was manufactured in around 1987. Thanks!

Looking for a window crank and a back door patio lock with a 2 inch set and a 5 inch box set

I measured, the best I could, the long arm being 8 3/4" the short arm at approximately 4"

I need 3 left hand and one right hand

I have a screw snapped off and need to replace the gear

The first three photos are the right window; the next two photos are the left. I believe this is a Swisco hinge and brackets, but the only identifying marks I see are "30818" on the hinges and "PRY TO REMOVE SASH" on the top tracks. Please let me know. I would like to fix both of these as soon as ... (cont.)

I have Bonneville windows likely from 1995 and the first 2 pics I attached ("1c - 20250817_145005.jpg" and "2 - inside crank and Bonneville sticker.jpg") are from my bathroom window where the small hinge's rivet rusted off. The next three pictures ("Angled hinge & hole.jpg", "Bottom hinges & ... (cont.)

Need to replace it Parts number U.S PAT. 4.241.541