Viewing all customer Discussions for:

39-171 Truth Hardware Dyad Operator

Looking for this dyad window part in white - looks similar to product code 39-220... see attached image. any ideas? Many thanks! Nico

Hey here's the Truth cranks I have. They're off a Marvin window from many years ago. Looks like your product 39-317 and 318 are same - except my 4" arms have a slight dogleg bend in them.

I need this

We are painting our windows white and would like update to white hardware. These are Marvin windows 2003. Would like to know if Truth Folding Handle And Cover Kit 39-107FK works or what should I buy? We have 2 windows that don't crank out correctly and have to manually from outside pull/or push w ... (cont.)

Here are some photos of the window openers I'm trying to replace. TRUTH 4525 seems like the only info we get to go on... I found something on your site that looks very close, but not as short as mine. I need four if you can find them.

Numbers in arm read. 30905

My casement window does not close completely. It seems that the hardware is worn. The pictures are taken from the good working window because I m afraid to open the broken one. On one metal bar, I can see Truth 30905. Another one is AMS 6093. Please verify from the pictures. My contractor needs t ... (cont.)

I have a small truth window in my shower it's 16 1/4 x 35 1/4. The crank and hardware is rusted shut. I can only find one part number 20810A. Please inform me on what parts I need to replace and I will send pictures.

Hi there, I need to replace an operator for my bay window. I have attached pictures of the opposite side of the one I need replaced for reference and I believe the39-172 would be the right fit. Hoping someone can point me in the right direction. Thanks!

I need the black part that slides with the window

need truth 30796 also right handed

Hi I don't have any numbers or anything listed it's pretty old.

I need a replacement Truth right hinge for an approx. 27" by 52" casement window made in 1996 by Aero Products (now known as Nordik Windows). The digits stamped on the pieces of the hinge are (1) 30905 (2) 30744? and (3) Revov?? SASH, along with the Truth logo. Can you identify the replacement part ... (cont.)

looking for replacement Truth casement operator - installed on Marvin Integrity windows Original model #45251. Purchased new 39-318 and 39-317 as replacements and they were too short and didn't close the window. Is there another model that we could use.

Hello, Is this a match to the Dyad Operator? https://www.swisco.com/Sash-Crank-Operator-3-1_8-inch/pd/Casement-Window-Replacement-Operators/39-171 I'll need 2 of these - one left and one right side. Thanks! Tim

Hello , thhis window crank from a Shuco casement window has stripped and I would like to purchase a replacement to repair the window. I would also like a new handle and retainer clip. The old mechanism also has a very thin cork gasket attached to the bottom of it if thats available. Thanks ... (cont.)

TRUTH 45251 Looks like 39-171 and 39-172 would replace my originals, except the link arm is 5" on those, and my originals are 4.5" at the most (maybe 4 3/8). Will it still work or will the arm interfere with the full closure of the window? I might just buy one to see and report back. ... (cont.)

Need replacement crank handles for 12 casement windows, six left-hand, six right-hand. Pictured is the mechanism (Truth) with the number 40941 stamped on arm in lower right side of middle picture. I was thinking of replacing with crank handles similar to: 39-107FK (although that spline is in middle ... (cont.)

Hi, have looked all around hoping you can direct me to this stripped crank The arm has 30905 Truth stamped on it. ive seen close like 39-172 but not same.

Can you please help me identify this replacement crank? Thank you