Viewing all customer Discussions for:

39-171 Truth Hardware Dyad Operator

I am a home owner who needs two sets of operators with the rotogear and hinge for our Marvin casement windows

Hi, I need to purchase some replacement parts for my 2 older model Weather Shield awning style windows. I need new cranks and the part the crank screws into. The elbow part of the mechanism is fine. I'm uploading some photos for identification. Thank you!

I cant find this anywhere.

Where can I get replacement parts or can they be repaired?

Hello: Our worn-out window crank mechanisms are stamped TRUTH. One has number 31272, and another has the number 40887. A third one has no visible number. They seem have the same or very near the same measurements. Photos are attached. Can you offer help to us? Thank you.

The window crank spins and will not open the window. This is the visible part to the operator showing it as Truth 30905. What needs to be replaced to get the crank functioning properly? Is it just this part that needs to be replaced or are there other connected parts to it that need to be changed ou ... (cont.)

Hello, I'm just trying to find a replacement for this part, the current one requires using vice grip pliers to open and close it now and it also doesn't shut all the way so I can't lock the window.

Hi - Looking for a replacement part for Truth 45251. See attached image.

I know it is a Truth crank. Two of the 3 dimensions matches the Truth Dyad 39-316. The arm with the hole to attach to the window is only 4.5", this part is 5". Will it still work with out modifications?

Hello, I need a window cranker like in photo. I need like 5 of them Measured 4"/around 1" Let me know if the half inch would work. Also one photo has like a window closer. Please guide me to the right one.

I am trying to identify this cranking mechanism, so that I might purchase for replacement.

New house with old casement windows. One window is missing operator and all other parts. A similar window has these two numbers top bar has 20819A and the lower arm has 31512 stamped on it. Is this an Entrygard 15? Or something else. Thanks.

Need replacement with locks

Trying to identify the correct replacement parts for the casement operator. Window opens from left to right. Original part manufacturer is Truth. Smaller part of arm is 4-1/2 inches total length. About 4 inches, maybe 3-15/16 from center hole to center hole. Overall width of the crank box is 3 ... (cont.)

Need to replace 3 casement hinges with crank. No make or model Numbers on the top slide are 31272

This crank is striped out. Older model 22 years old. By the looks of what you have a 1/2" larger in the arm seems to be considered its replacement. Also need the end bracket as mine is bent.

Hello, looking for some help getting a customer the correct replacement operator and hinge. I looked and looked but didn't see anything that matched exactly. Do you have a recommendation that would work?

Hi. We have a truth 30744 casement window crank that need replaced. See pictures, Pictures show the 1 window 2 A good crank installed on a different window And 3 the rusty part we need replaced on a broken window. Please help us order part. Thx

hi there. i need operator and hinge for this window.

Our windows use this hinge. 36-004-10 - 10" Stainless Steel 2 Bar Hinge Set. we now need regulators. I have attached pictures, I need 30 plus regulators.