Viewing all customer Discussions for:

39-205 Truth Folding Crank Handle, 11/32"

The picture is of the opening and closing crank. This is for a Marvin window bought sometime in early to mid 1980's. The window is 141/2 in. Wide.

Hello. We have 2 clad case master Marvin windows. The cranks (part number 10898240 ) no longer work. They are discontinued. There may also be a problem with the operator too. When the cranks did work, we could get the window to open. However, to close the window you'd have to lean on it from the out ... (cont.)

It is stamped Truth Entry Guard, and has gears similar to 39-036, but the operator's arms and link arms look different.

Has the # 30841L onthe arm. And has the #30830 on the case by crank. I will need both L&R hand. This is a truth operator

This is probably Truth part, but I am not sure

Wright 7701

I need 3 foldable cranks for 2 casement windows. What do you recommend? How much will they cost? Does that include shipping? Thanks.

The left handle is broken off and the right side lock is broken. The color is an almond (off white)

Looking to match and order these. Any suggestions would be helpful

Hello! Looking for a crank for a 2008 Weather Shield window. Colors an available ?? Hard to explain the color... Is that something I could possibly get from you? Thank you! Not sure if this picture is helpful at all regarding a new handle. I should mention that the whole structure is 5" lo ... (cont.)

I've got a casement window with Wright Delmar operators. The handle shaft has snapped off inside the control, so I need to find a replacement. Please see the attached photos. The control is 4" long. Can you suggest the correct replacement part? Also, since the Right side control broke, should I ... (cont.)

Hi there, What model do I need to replace this casement operator?

Hello- I'm looking to replace these two operators. The left side has markings 20544 and 30744. The long arm is 9.5" and the short arm is 4.375. The right side has markings 20810 and 40841L. Same arms lengths as above. Thank you!

I need this part for window to open and close I need left and right both windows so two of them Let me know where I can buy this or order it RakeshAppreciate your help

The word "truth" is seen on the bottom right of this split arm operator

Hi There - I can't find an identifying info and my client would like to replace the brown hardware with white to coordinate with a larger renovation. Can you help?? The project is in Lexington, MA - these windows were probably replaced in the late 80's? (really a guess - it was done with a previou ... (cont.)

As seen in the pictures I am looking to replace the crank operator for both right and left window panes.

Screws on the outside part are just a hair over 3" apart. When I close it all the way, it seems like the gears are stripped. If I push open the window a bit, it engages. This part finder is a very cool feature, btw. -steve

crank arm is 8.5 inches long.crank body is 4" x 2-3/4". unit appears to be permanently sealed and cannot be disassembled any further.numbers are on the part. 03212007 08:17 and 40050

The crank doesn't close the window, i believe it is stripped and needs to be replaced. On the arm of the operator is the # 31850. On the underside of the operator the number 012108 00:49 is stamped. There is also a die-cast number between the screw holes - 45251.