Viewing all customer Discussions for:

39-205 Truth Folding Crank Handle, 11/32"

Hello -- I live in a first floor condo unit. I have three small windows that crank out to open, and the far right window crank appears to be stripped. I'd like to replace all three window cranks, as the unit is over 15 years old. What parts do I need to replace, and is it possible to replace these ... (cont.)

Crank don't work window don't pull shut

I have casement windows, circa 1982-84, that have cranks that have failed. I need both left and rights. From what I have found, US patent number 4.241.541 1982 and on the short arm is etched number 31538. Long arm is approx 9 1/2" and short arm approx 3 1/2" to swivel then 4"

Will a 39-375 handle work as a replacement for the current fixed operator handle?

Attached are the requested photos

Truth bracket replacement, please advise

This is the hand crank to open side windows on a living room exterior window. One crank is broken. Base Dimension: 5 7/8 long by 1 3/8

I recently had some second hand Jeld Wen windows installed in a remodel. The casement window lost the handle in the transition. I need to get some replacement but there's no recommendations to which handles go with which crank. Just trying to find images of the hardware in tact has proven difficult. ... (cont.)

I would like to replace the handles on our 1997 Cascade series 3000 casement windows with folding handles. Will the 39-107FK work as a direct replacement? I am attaching photos of the original handles. Thank you for your assistance.

Sending my pictures for casement window parts. The old parts of window is name Wright looking for operator with split arm,left as shown in picture and also sash lock for it

All of the casement windows in my house have Truth dyad operators similar in size to SWISCO products 39-171 and 39-172. I want to install operators with folding handles in all of my windows but I could use some guidance as to which of your products are appropriate replacements.

Looks like "Entry Guard"by "Truth" the carpenters were kind enough to build in a removable trim piece for access. i have 4 of these windows and all of them have fallen apart.i have watched your video on replacement and i can handle it.I would like to know if you have these parts and how much they ar ... (cont.)

Brand: SimontonType: CasementOpens: Hinged on right looking from inside.Photo is of an identical window. I broke the operator shaft at the crank handle, and need a replacement operator.Thanks,Paul

Hello, we installed in 2015 Milgard fiberglass windows to our bedroom and bathroom. The crank mechanisms are the same. The crank handle in the bathroom broke. I put the photos of the proper working handle's photo and a photo of the crank without the handle so you can see the mid part. Could you let ... (cont.)

spinny handle that cranks the window open (swings left) Not sure of brand.

I'm trying to figure out which new crank to order. My old ones have the numbers: 16 and 45054 stamped inside. Do I order 39-205, 39-107FK, 39-232? Thank you for your advice.

My window has the below makings on the label. I have found on your website Sash Dyad Crank 39-187 and 39-188 Can you tell me if these are the correct replacements? NAMI NFRC 100 code- HII-280-1 spec-NFRC series-CLCASE mst- 280-M-006,7, 14,15 Cortilird HII-280 0.47-97

Please see the attached pics from my customer looking for a replacement for their awning window cranks. Am I right in assuming that your 39-389 kit should work? I am not able to see any identifying numbers or markings anywhere.

I am looking for a Norco crank out window cranks handle part number 450112. Above are the photos of the handle. Thank you

Does weathervane make crank that doesn't part my drapes, or other replacement that would work ?