Viewing all customer Discussions for:

39-205 Truth Folding Crank Handle, 11/32"

I can't find any markings or brand name on these windows or on the parts. Can you identify what replacement handles I need? Thank you!

i need to change these to a folding window crank so that I can install shades. Do you sell compatible parts?

Hello, I would like to replace the twist handle of the window with a crank handle. Can you identify which part I need? There are no screws or identifying numbers on the current twist handle. A "+" sign is visible. Thank you, -Jane

I can open the window but there's not enough tension to close the window. The house was built in 1989. I can see WRIGHT on the arm operator.

The part that the crank handle attaches to, (looks like a bolt, or screw) is coming out and you can turn it to open the window but when you try to close, it pops right out of the mechanism.

What is the proper replacement fixture Thanks

Hello, I am looking for 2 white covers and crank handles for this crank. A right and a left. All of the part numbers start with numbers 308. Can you help? Thank you.

I'm looking to replace many of these crank handles with something low profile or folding so that they don't interfere with window shades. Can you help identify something? I believe the shank is roughly 3/8" but someone claimed it was "3/8" Special"

I look forward to getting the parts I need to make the windows open properly?. Here are the photos I have, not the best but a start? I'm looking for new locking levers windows have 2 each on them also looking to get new fold down cranks. All in white. I'm looking for new locking levers windows have ... (cont.)

I have a broken window handle that I need to replace. There doesn't seem to be a logo or serial number anywhere on the window. Can you recommend a replacement? See attached photos of the broken handle and another that is intact.

I have an old window with no marking as to manufacturer. Inside crank hole is stripped. Window will not open or close with crank. I have not been able to remove the handle cover to view the handle hardware. I think I need a new crank mechanism. Thanks for your help. Do I need to get all new hardware ... (cont.)

Windows are Alside U1000, circa late '90's. Straight cranks protrude too far and interfere with blinds. Crank is 3 1/16" L. Looks like 40085 stamped inside. Attaches to window with 12 splines and set screw. Dia. across splines is approx. 0.326". I was looking at Truth 39-205, but don't know if splin ... (cont.)

Hi, The crank handle for my casement window came off its dock. When you look at the underside, there is no place for gears to fit so it's different from a lot of crank handles. The black part that is still on the dock fits into the handle but I can't get the little metal piece to stay in the cran ... (cont.)

Greetings advanced help support, I need it!I have nine casements, there are two types of actuators, two smaller singles and seven of the dual actuated types. The actuators are in decent shape, no gear problems? but I want to convert the fixed internal handles to foldable to get the handles out of t ... (cont.)

I have several Norco Awning windows and some of the operators are getting worn out. Attached are pictures of one still working. The windows are around 40" wide and the operating arms are around 12" long that push them open. I have attached some photos. I need to know if you have a replacement unit ... (cont.)

Hello! Our handyman took the included photos and recommended that we contact you. We need 2 crank-out window mechanisms, one that's right-sided, one that's left-sided. We also need 1 new handle for the right-hand side of one of the windows. Thank you so much for your help!Judy

Looking for covers and cranks for this window. Can't find any part numbers on it but the brand is Truth and pat. No. 4,840,075. Made in USA. Prefer a foldable crank.

Hi I don't have any numbers or anything listed it's pretty old.

I am trying to make sure I have the correct hands and hardware to fix my windows. I have attached 3 pictures showing the setup I have. I would like to replace the crank and the casing. The handle just comes out and I am assuming its not supposed to do that. I think I may need the arm as well. My ... (cont.)

Hi, is it possible to replace this type of crank handle with your covers with a nesting or folding handles? Our cranks work fine, except we would like to have nesting handles to accommodate blinds. Thank you.