Viewing all customer Discussions for:

39-205 Truth Folding Crank Handle, 11/32"

Truth Hardware Operator Cover and Crank handle 11/32" I need the insert that connects the handle to the mechanism under the cover.

The base that mounts to the sill is 2 1/8" front to back, 5" left to right. The straight arm is 9 1/2" long. The curved arm that extends to the right is approximately 8" long. Thank you

11 inch The bar is 11.25 inches long. The windows that I have have a channel at the bottom that a wheel rides in and they are rear mounted. Maybe a shorter arm might work? The height of the wheel is 5/16" tall and the groove that the wheel rides in is 9/16" wide. Yes I need 3 left and 3 right ... (cont.)

Top part on jamb and sill part are 10 inches Bottom on window is 7.5 Crank part is 5 inches

I am looking for a Silverline casement window model 7552 fold down crank handle. Previous owners replaced the broken handle with incorrect hardware. Need to find replacement. Appreciate any help. Thanks in advance. I think you have several that look similar but not sure which is correct option. R ... (cont.)

Good Afternoon,Trying to find a replacement window crank for the SIL-1 model 7500/7550 bow window in the new house I just purchased. Attached are four photos of the broken original crank. Thanks in advance for any help you can provide in locating a replacement part.Bill

Crank handle for ALSIDE 29 1/2 X59 1/2 crank out window.

Hello, we are looking for this Marvin Awning Operator, the arm length is 9-1/2" and it has a pivot shoe on the end that connects to a rail on the bottom of the sash. Please let us know if you have this. Along with the crank handle. Thank you.

Window Crank about 5 1/2 inches long

I purchased part number 39-032 and 39-031 from you on 5/26/2022. I now need to purchase the 2 hand cranks associated with the dual arm operators that I purchased.The only numbers I see on the hand crank are US PAT des 361490ThanksFred

Look for this window handle made by Seira

We are painting our windows white and would like update to white hardware. These are Marvin windows 2003. Would like to know if Truth Folding Handle And Cover Kit 39-107FK works or what should I buy? We have 2 windows that don't crank out correctly and have to manually from outside pull/or push w ... (cont.)

On the body of the unit: 40471, 25, 91. On the longer primary arm: 30470 LH. On the shorter secondary arm: L30841, 20810.

I am looking for the replacement handle and spindle for a Truth 45206 window hinge. Is this something you carry or can help me locate? Any help is greatly appreciated. This is for an area that has limited funding so I am trying to keep from having to replace the entire assembly.

The crank has broken off. I can see no markings on the window but there are Andersen windows throughout the rest of the house. There is the number 2108 on the inside of the crank.

Do you have a replacement for this handle?

It seems the original one is from Acorn, can you please help me to find a correct replacement? Thank you.

This handle is getting stuck and not opening nor closing.

Hi I am looking for this bronze LH arms are 9 & 4-3/8

I HAVE BEEN TRYING FOR TWO MONTHS NOW TO RECEIVE A NEW HANDLE AND OPERATOR FOR MY CASEMENT WINDOW(S)BELOW ARE TWO PICTURES, OLD AND NEW HANDLES AND OPERATORS.I JUST RECEIVED YET ANOTHER NEW HANDLE AND OPERATOR FROM WINDOW PARTS.COMTHE HANDLE DOES NOT FIT OPERATOR.THERE WERE NO MARKINGS OR NUMBERS O ... (cont.)