Viewing all customer Discussions for:

39-205 Truth Folding Crank Handle, 11/32"

Thinking I need a modified 39-032My long arm is about 5 1/4 not 10 3/4 as in the 39-032 version...so I need a 39-032 with a 5 1/4" long arm (not 10 3/4 as in the 30-032)My window hinges are on the left side of the leverDoes that mean I need the 39-032 type of lever?...or do I need the 39-031 version ... (cont.)

Bought a house w/ about 20 windows installed by MY WAY in Wappingers Falls in 2016. Many of the operator cranks are broken. Failure point in all is the cast aluminum sleeve w/ small set screw, held in place by a drive pin. I need to replace 5 defective cranks, but would also love to have some of th ... (cont.)

Any thoughts on a replacement?

Please adivse if you carry this casement window crank and what product number it is. THanks for your help.

Looking for replacement for these 2 parts. Both vinyl windows

Per my contacting your customer service regarding the two window handles received and the one that is an incorrect fit, I was advised to send comparable photos of our current closer with the one that was sent. Attached are the pictures and order info. The two operators were for the same window uni ... (cont.)

We are looking to replace 2 handles like this. We would like something that fold down into itself, so it doesn't stick out - preferably in white. Do you have a replacement handle that would work here? Approximately 5 inches long

Hello , thhis window crank from a Shuco casement window has stripped and I would like to purchase a replacement to repair the window. I would also like a new handle and retainer clip. The old mechanism also has a very thin cork gasket attached to the bottom of it if thats available. Thanks ... (cont.)

2 arms, short arm says 31538, long arm is about 8 3/4" There is a label, TRUTH and a phrase "Entry Gard" There are 6 Phillips screws on the bottom to hold the unit down. I need both a right and a left unit in white, and I need the whole kit---cover,handle, etc. In both the right and the left unit ... (cont.)

Need replacement crank handles for 12 casement windows, six left-hand, six right-hand. Pictured is the mechanism (Truth) with the number 40941 stamped on arm in lower right side of middle picture. I was thinking of replacing with crank handles similar to: 39-107FK (although that spline is in middle ... (cont.)

I would like to replace my older Marvin Window cranks to a lower profile fold up handle. Can you suggest a replacement? Thank you.

I am looking for crank operators similar to the SWISCO Rear Mount Casement operator, 39-023 but with a 13 1/2" length. Do you have a part number and price? Thanks

Looking to replace existing handles on Truth mechanisms with folding style

Hello! I am trying to figure out what hardware this is, the chrome is pitted and I would like to replace the chrome items with a bronze to avoid a repeated pitting in the costal condition. Can you please help me identify this hardware? Some of the windows have a truth logo on the armature, but I can ... (cont.)

Hi I need a replacement casement window opener/closerThank you!-Albert

I would like to change out our window crank hardware for left and right side versions of a flush style crank, rather than how the handle stays out as pictured. If this is feasible, please provide a list of all parts required to make the conversion.

Can you please help me identify this replacement crank? Thank you

Hello, Do you have this window actuator in stock? Thank you, Rachael

Hello,We recently went through a remodel. We are missing several window cranks. We would ideally like to move to folding window cranks - away from the ones currently installed. Do you have a part that would accommodate this? Thank you!Lindsey

Hi! Wanted to confirm which part I need to buy to swap out the existing Truth branded crank for one that folds in. Would this part: Truth Folding Crank Handle, 11/32" Product Code: 39-205 be the right replacement? Or is there something else you'd suggest? Thank you!